G-Class Owner's Manual - Mercedes G-Class, G-Wagon, G500, G55 ...

Selecting the standard display 1
Select the INSTRUMENT CLUSTER submenu
by pressing the æ or ç
button.
Press the j or k button repeatedly
until the SELECT DISPLAY message
appears in the display.
The current setting is highlighted.
1 Except the United Kingdom.
P54.30-6207-31
Englisch (NL, RU): P54.30-6207en-31
Französisch: P54.30-7448-31
Italienisch: P54.30-6207it-31
Spanisch: P54.30-6207sp-31
Select the required display by pressing
the æ or ç button.
Lighting submenu
You can reach the LIGHTING submenu via
the SETTINGS... menu.
You can determine the following settings
for your vehicle's lighting in the LIGHTING
submenu:
Function Page
Set constant headlamp mode 145
Switch the locator lighting on/
off
146
Set the exterior lighting delayed
switch-off
147
Set the interior lighting delayed
switch-off
148
Nur fuer internen Gebrauch
Controls in detail
Operating system
Setting constant headlamp mode
If you have set constant headlamp mode
and the light switch is at 0, the following
light up automatically:
Side lamps and dipped-beam headlamps
Licence plate illumination
For safety reasons, you can only select
these settings when the vehicle is stationary.
This function is not available in countries
in which there is a legal requirement
to use constant headlamp mode.
Select the LIGHTING submenu by pressing
the æ or ç button.
Press the j or k button repeatedly
until the LIGHT CIRCUIT HEADLAMP
MODE message appears in the display.
The current setting is highlighted.
145