G-Class Owner's Manual - Mercedes G-Class, G-Wagon, G500, G55 ...

Controls in detail
Operating system
If malfunctions occur while you are driving,
the number of malfunctions will be shown
again in the display at the end of your journey
(key in position 0 or removed from
the ignition lock). Each malfunction is displayed
for approximately five seconds.
Press the reset button to display the next
malfunction immediately.
Press the reset button located on
the left of the instrument cluster
( page 126) repeatedly until you have
viewed all the malfunction messages.
138
i
All malfunction messages are cleared
from the malfunction memory when you
turn the key back to position 1 or 2 in
the ignition lock. Only the priority 1 malfunctions
will then be displayed. Should
any malfunctions reoccur, they are displayed
once again.
Settings menu
The SETTINGS... menu has two functions:
The reset function: RESET WITH RESET
BUTTON which you can use to reset all
the settings to the factory settings
A collection of submenus which you
can use to make individual settings for
your vehicle
Press the è or ÿ button repeatedly
until the SETTINGS... menu appears
in the display.
P54.30-6076-31
(DE, EN, FR, SP, IT)
Nur fuer internen Gebrauch
Resetting all settings
You can reset the functions of all the submenus
to the factory settings.
To do this, press the reset button located
on the left-hand side of the instrument
cluster for approximately three
seconds.
The request prompting you to press the
reset button once more to confirm appears
in the display.
Press the reset button again.
All the submenu functions are reset to
their factory settings.