G-Class Owner's Manual - Mercedes G-Class, G-Wagon, G500, G55 ...

Controls in detail
Features
1 To engage the mobile phone (arrow)
2 Lugs
3 Telephone bracket
Insert the lower part of the mobile
phone into lugs 2 in telephone bracket
3.
Press the mobile phone down in the direction
of arrow 1 until it engages in
telephone bracket 3.
234
P82.70-4637-31
The mobile phone is connected to the
hands-free system and the multi-function
steering wheel.
The battery is charged depending on its
current charge status and the position
of the key in the ignition lock. The
charging process is shown in the display
on the mobile phone.
i
First the phone book stored on the SIM
card is read. If there is sufficient memory
space remaining, the entries in the
phone book stored on the mobile
phone are also read.
You can make a call using buttons í
and ì on the multi-function steering
wheel. Other mobile phone functions can
be controlled via the operating system
( page 159).
Nur fuer internen Gebrauch
i
When you remove the key from the
ignition lock, the mobile phone remains
switched on for approximately ten minutes
(run-on time). If you make a call
during this time, the telephone will be
switched off approximately ten minutes
after you have hung up.
Run-on time:
You can change the run-on time by
means of an additional phone book entry.
Enter "Nachlaufzeit" for the name
and a figure between "1" and "30" for
the number. If you do not enter a figure,
or you enter an invalid figure, a run-on
time of ten minutes will still apply.
You will find details of how to make an
entry in the phone book in the mobile
phone Operating Instructions.