Billing Code - PHMSA - Department of Transportation

stowage code 25 is not currently listed in Column (10B). If the proper shipping name
already is currently assigned both stowage code 19 and 25, stowage code 19 will be
deleted.
Proper Shipping Name UN
Number
47
Proper Shipping Name UN
Number
Copra UN1363 Plastic molding compound in dough,
sheet or extruded rope form evolving
flammable vapor
Polymeric beads, expandable evolving
flammable vapor
Sulfur UN1350
UN3314
UN2211 Sulfur NA1350
We are also assigning stowage code 25 to every Class 1 explosive table entry to
indicate these materials must be protected from sources of heat in accordance with the new
definition of “protected from sources of heat” in § 176.2. See Section 176.84 for a detailed
discussion of our revision to stowage code 25 and § 176.2 for the definition of “protected
from sources of heat.”
Stowage code 50 is currently not assigned to any HMT entries and is being deleted.
PHMSA is revising stowage code 128 to account for a citation change in the IMDG
Code. The new text of stowage code 128 is “stow in accordance with the IMDG Code,
Sub-section 7.6.2.7.2 (incorporated by reference; see § 171.7 of this subchapter).”
PHMSA is deleting stowage codes 7E, 8E, and 20E. The reduction in the number
of vessel stowage categories in column (10A) makes these codes unnecessary and any
applicable stowage requirements are covered by the requirements of the applied code in
column (10A).
The following proper shipping names and corresponding identification numbers