FONIX® FP35 Touch - Frye Electronics

An Overview of the FP35 Touch 5
VIDEO
SPEAKER EARPHONE CONTRAST RS232 PRINTER POWER
Figure 1.2.3B—The “08” rear-panel, manufactured between February 2007 and October 2008.
VIDEO
EARPHONE SPEAKER
CONTRAST
RS232 PRINTER KEYBOARD POWER
Figure 1.2.3C—The “original” rear-panel, manufactured before February 2007.
Video Connects to an external monitor (optional).
Earphone Connects an insert earphone to the FP35 in order to perform
RECD or audiometric measurements. It can also be used to
connect a Telewand or telecoil board for telecoil measurements.
Speaker Connects an external sound field speaker or external sound
chamber to the FP35 analyzer. Can also be used to connect an
external telecoil board or Telewand (-08 or -09 rear panel only)
Contrast Changes the contrast of the LCD display.
RS232 Connects to a computer in order to run a computer program or
to upgrade your software.
Printer Connects the FP35 to an external printer.
Keyboard This connector has no function (original rear panel only)
Power Connects the FP35 to its power supply. We recommend that
you attach the power supply to the FP35 before plugging it
into the wall.
The following symbols can be found on the back and on the bottom of the FP35:
Meaning of Symbols
Read the accompanying documents. Please read this manual
before operating the FP35. A separate maintenance manual
exists for the FP35. If you wish to obtain a maintenance manual
please contact Frye Electronics, Inc., or your Frye representative.
For purposes of safety classification under IEC 60601-1, the
FP35 is class 1 equipment, Type B.