FONIX® FP35 Touch - Frye Electronics

18 FONIX FP35 Hearing Aid Analyzer
Units may be returned to Frye Electronics, Inc., 9826 S.W. Tigard St., Tigard,
Oregon 97223. Please contact the company or your local Frye representative
first, since many problems can be fixed without returning the whole unit. If
something must be returned, a return authorization number (RMA) will be
issued to be attached to all returned materials.
When contacting the factory, please have the serial number of your instrument
on hand. Look for this number on the bottom of the instrument. It will also
be helpful for you to be able to tell us the software version installed on your
machine. Check the Opening Screen for this information.
1.7.2 Cleaning the Instrument
For your safety, disconnect the FP35 power supply from electric power while
cleaning.
Wipe the FP35 case with a slightly moist soft cloth. Use plain water or water
with mild dishwashing detergent. Wipe away any detergent with a clean, moist
cloth, then dry the FP35.
The LCD surface can be easily damaged, so wipe lightly and use a soft, waterdampened
cloth to clean it. Do not allow liquid to enter the LCD opening.
The microphones should be wiped with a dry cloth. Excess moisture may damage
the microphone.
The external power supply may be cleaned with a cloth dampened with cleaning
alcohol. Clean the outside of the enclosure only.
Warning: Do not immerse the power supply in water or a safety hazard could
arise during use. This could cause an electric shock hazard.
Never allow fluid to enter:
• The Liquid Crystal Display (LCD)
• The electronics module
• The electrical connectors
• The external power supply
Solvents and abrasives will cause permanent damage to the FP35.
1.7.3 Warranty
The FONIX FP35 and its accessories are guaranteed to be free of manufacturing
defects which would prevent the products from meeting the specifications
(given in Appendix A of this manual) for a period of one year from the date of
purchase.