FONIX® FP35 Touch - Frye Electronics

20 FONIX FP35 Hearing Aid Analyzer
Note: To exit from any screen, press the [EXIT] key.
Audiogram
Entry
Real-Ear
SPL
Aided Gain
Insertion
Gain
OPENING
SCREEN
F2 F3 F4/F5
Coupler
Multicurve
Coupler
Target
Coupler
EarSim
Figure 2.1.1A—Flowchart of the FP35 screens
ANSI
Toggle
Pressing a function key in a measurement screen will usually toggle a selection.
For instance, pressing [F2] in the Coupler Multicurve screen will toggle through
the various curves.
Pop-up Menu
In some cases, a particular function key will have several different available
settings. For example, in the Coupler Multicurve screen, [F4] selects the source
type for a frequency measurement. You can either push the function key repeatedly
until the desired setting appears, or you can push and hold the key down
for half a second to pop up a function key balloon menu.
A function key balloon menu is a listing of all available selections for that key.
Choose the desired selection with [q, p]. When satisfied, press [START/STOP]
or push and hold the function key for half a second again. Figure 2.1.1B shows
an example of a Function Key Balloon Menu.
Action
Sometimes function keys perform an action. For instance, in most measurement
screens, [F5] levels the sound chamber. By looking at the label of the function
key, you should be able to determine the action of the function key.
IEC
JIS
ISI