FONIX® FP35 Touch - Frye Electronics

An Overview of the FP35 15
-20 º C
5%
%
Probe Tubes
60 º C
85%
The shipping/storage temperature of the FP35 is -20 to 60
degrees Celsius (-4 to 140 degrees Fahrenheit)
The shipping/storage Humidity of the FP35 is 5 to 85 percent
relative humidity (non-condensing)
This symbol, included on the probe tube packaging, indicates
that probe tubes should be discarded after use in order to prevent
the possible spread of infection. They cannot be cleaned,
sterilized, or reused. Cutting the probe tube to a shorter length
will invalidate the probe microphone calibration.
Safety Classification for IEC 60601-1
Type of protection against electric shock: Class I
Degree of protection against electric shock: Type B
Protection against harmful ingress of water: Ordinary
Mode of operation: Continuous
The FP35 does not require sterilization or disinfection.
The optional probe microphone and insert earphone are applied parts of the FP35
analyzer.
Warning: This equipment is not suitable for use in the presence of flammable
anaesthetic mixture with air or with oxygen or nitrous oxide.
Warning: Connect only to the power supply packaged with the FP35. This power
supply is a component of the FP35 analyzer. Using other power supplies could
lead to electric shock or other safety hazards.
Warning: To avoid the risk of electric shock, this equipment must only be connected
to a power supply with a protective earth.
Warning: Do not connect the probe microphone to the patient unless it is connected
to the FP35 analyzer.