Tender invited for Development of Train Collision Avoidance System

More documents

Recommendations

Info

PART-II SECTION –II SPECIAL CONDITIONS OF THE CONTRACT (SCC) Page 1 of 72 of Part-II Sec-II
0. Preamble: 0.1 It is proposed to develop product of Train Collision Avoidance System, which is meant to provide protection by preventing trains to pass signal at Danger (Red), excessive speed over turnouts / Speed restrictions and to avoid the situation in which more than one trains are coming close on the same track to cause collision by automatic application of brakes in the train, in case operations are not able to control so. It also provides assistance to Loco Pilots by means of pseudo-real-time display of signal aspects in Loco Pilot’s cab. 0.2 This is a development project of RDSO. This is based on new and innovative technology. Its Functional Requirements have been developed through the process of open Expression of Interest. The minutes of various EoI and other general meetings for development of product have been kept on website. 0.3 Having ascertained technology demonstration through field concept trial in October’2012 and Novemeber’2012, it is now worth making this system ready for implementation as early as possible since early implementation of this safety system on development might even save loss of human lives by preventing accident and thus it would serve cause to humanity. 0.4 The ultimate goal for development of Train Collision Avoidance System (TCAS) is to have system conforming to Functional, System and Technical requirements by RDSO which shall have features of multi-vendor interoperability. In order to test the compatibility among various Locomotive units, Stationary units and track-side units from different vendors for the purpose of multi-vendor inter-operability, itis imperative to have the products from the multiple vendors. It is utmost necessary to look for multiple sources since the onset of development. Therefore, The developmental work has been segregated in different packages which are aimed to be awarded to different vendors. 0.5 This activities through this tender shall involve Research & Development (R&D) which incorporate improvement and modifications in the product and finalization of Specification accordingly for the purpose of upgradation, improvement and compatibility requirements during the course of repeated trials. 0.6 The objective is to develop multiple indigenous sources with the product consisting of few generic components. For analogous situation, personal computers are vastly available and used in India but these also contain certain components which are manufactured abroad only. 0.7 The project with the design developed may get proliferated on mass-scale on Indian Railways in the future. Page 2 of 72 of Part-II Sec-II
Page 1 and 2:
GOVERNMENT OF INDIA MINISTRY OF RAI
Page 3 and 4:
7.0 Tenderers can download and use
Page 5 and 6:
GOVERNMENT OF INDIA MINISTRY OF RAI
Page 7 and 8:
INSTRUCTIONS TO TENDERERS: 0100. GE
Page 9 and 10:
0500. QUALIFYING REQUIREMENTS OF TE
Page 11 and 12:
III. Technical and commercial Bid f
Page 13 and 14:
destination rates unless the tender
Page 15 and 16:
himself with existing conditions on
Page 17 and 18:
2211 A list of Test and Measuring I
Page 19 and 20:
INDIAN RAILWAYS STANDARD CONDITIONS
Page 21 and 22:
addressed to the Contractor shall b
Page 23 and 24:
0606. The Contract Performance Guar
Page 25 and 26:
of a similar description (when stor
Page 27 and 28:
The contractor shall, if so require
Page 29 and 30:
The standard payment terms subject
Page 31 and 32:
The contractor shall perform the co
Page 33 and 34:
The prices stated are to include al
Page 35 and 36:
Contractor, or by any one employed
Page 37 and 38:
3101. The Contractor should take al
Page 39 and 40:
To The President of India Acting th
Page 41 and 42:
Page 1 of 1 ANNEXURE-2 PROFORMA FOR
Page 43 and 44:
PROFORMA FOR AUTHORITY FROM MANUFAC
Page 45 and 46:
PROFORMA FOR STATEMENT OF DEVIATION
Page 47 and 48:
To PROFORMA OF BANK GUARANTEE FOR C
Page 49 and 50:
To PROFORMA OF BANK GUARANTEE FOR 1
Page 51 and 52:
PROFORMA BANK GUARANTEE FOR BID GUA
Page 53 and 54:
Annexure -11 CHECK LIST 1. Have you
Page 55 and 56:
G1.00 Law governing the contract:-
Page 57 and 58:
G15.00 Provisions of Contract labou
Page 59 and 60:
of the Contractor or any of his emp
Page 61 and 62:
ISO 9001: 2008 Effective from 18.06
Page 63 and 64:
Page 65 and 66:
Page 67 and 68: ISO 9001: 2008 Effective from 18.06
Page 117: GOVERNMENT OF INDIA MINISTRY OF RAI
Page 121 and 122: 1.5.4 The development of the equipm
Page 123 and 124: and generate brake curve based on t
Page 125 and 126: 2. Qualifying Requirements of Tende
Page 127 and 128: SN Description 1 Tenderer is manufa
Page 129 and 130: SN Description (x) Handling of RF R
Page 131 and 132: discretion at the time during the 5
Page 133 and 134: 4.1.1 Contract Package A (Approx. 5
Page 135 and 136: presentation through fields decoded
Page 137 and 138: and Vikarabad) in such a way that t
Page 139 and 140: 4.27.2.1 For On-Board Equipments i.
Page 141 and 142: S. Description Section On board No.
Page 143 and 144: 8.4 If it becomes necessary for the
Page 145 and 146: 15. SUPPLY AND CUSTODY OF MATERIAL
Page 147 and 148: account of another vendor not being
Page 149 and 150: Page 32 of 72 of Part-II Sec-II
Page 151 and 152: Contract Package A : Wadi (Excludin
Page 167 and 168: Contract Package B : Sadashivpet Ro
Page 169 and 170:
Contract Package B : Sadashivpet Ro
Page 171 and 172:
Page 173 and 174:
Page 175 and 176:
Contract Package C : Chitigidda (Ex
Page 177 and 178:
Contract Package C : Chitigidda (Ex
Page 179 and 180:
Part-II Sec.-II Annexure-1: Self As
Page 181 and 182:
SN Description (x) Handling of RF R
Page 183 and 184:
S. No. Item P.5 Supply of complete
Page 185 and 186:
S. No. Item Q.1 Installation & comm
Page 187 and 188:
S. No. Item Unit Qty of Contract Pa
Page 189:
S. No. Item S.9 Supply, Installatio
show all

Tender invited for Development of Train Collision Avoidance System

Create successful ePaper yourself

Delete template?

Save as template?