You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
2) Press the REC button.<br />
3) Press the appropriate F button(s) below the LCD screen to set the desired Part(s) to REC.<br />
4) Begin recording by following step 2 in the “To Record” section on page 42.<br />
Remember Re-Recording a Part completely erases the previously recorded performance for that<br />
Part. You can Re-record or add any of the RIGHT/LEFT Parts as many times as you like but you can<br />
only have one performance/sound for each RIGHT/LEFT Part.<br />
Saving the song<br />
Once you finish recording a song you should save it to disk before you turn the power OFF. Once<br />
the power is turned OFF your song data will be lost.<br />
See the section titled “Saving Data to a Floppy Disk” on page 157.<br />
• If you press the EXIT button to get out of the Easy Recorder, the CP will automatically prompt<br />
you to save your work.<br />
Erasing the song<br />
Whenever a Part is selected for recording, the new performance is written right over any existing<br />
one that may be there for that Part. In this sense, the Easy Recorder is just like a tape machine. A<br />
new song will simply erase the old song during the recording process.<br />
However, if you wish to simply erase all the Parts and the Style in a song at once you can use the<br />
Delete function.<br />
To delete a song:<br />
1) Press the DELETE button (F2) while the Recorder is not recording or currently ready to record. The<br />
CP will ask if you are sure.<br />
2) Use either the YES (F7) button to proceed or NO (F1) to cancel.<br />
Recording a Song P. 45