Compact / CANmotion /Motion Controller ... - Schneider Electric

4 To add a POU to the motion
task double click the Motion
and click on Add POU.
Select the POU like in step 2.
Note:
This task is linked to the motion
configuration. The time base, in
this application is set to 4ms.
See at
“Add the CANmotion bus” and
step 4.
Add Vijeo
Designer HMI
1 To add a Vijeo Designer HMI
unit to the project right click on
Performance_CANmotion
_LMC058
and select Add Device…
2 In the Add Device select
Schneider Electric as
Vendor. Click on:
Magelis HMI->
XBTGT5000 Series->
XBTGT5330.
Click on Add Device.
Performance CANmotion LMC058 Schneider Electric 101