Compact / CANmotion /Motion Controller ... - Schneider Electric

Stepper Drive Lexium SD3
Lexium Stepper Motor Drives SD3 offer quality in a package: a
compact drive plus a high-accuracy motor.
Reference values are typically preset and monitored by a
Schneider Electric motion controller.
In most cases, a gearbox is not required due to the high
torque.
The SD3 drive and the sinusoidal commutation of the motors
enable almost completely resonance-free operation.
With its small footprint (72 mm wide, 145 mm high and 140
mm deep), SD3 requires very little space in the control
cabinet.
The drives are available up to 6.8 A.
SD3 are suitable for mains supply with 1~115 Vac and 230
Vac (50/60 Hz) and feature a 5 V and a 24 V pulse/direction
interface
or fieldbus interfaces (CANopen, CANmotion and Modbus).
The mains filter is integrated and current at standstill is
reduced automatically.
Modicon LMC058 Motion controller LMC058LF424S0
The Motion controller Modicon LMC058 is the solution for axis
control and positioning, including automation functions.
The expandability is based on Schneider Electric "Flexible
Machine Control" concept.
This motion controller is designed for machine manufacturers
(OEMs) who require synchronized axes.
The LMC058 master motion controller includes as standard:
42 digital I/O: 26 inputs and 16 outputs
4 analog I/O: 4 inputs
1 RJ45 port: Ethernet
1 SUB-D port (9-way male): CANopen master
1 SUB-D port (9-way male): CANmotion master
Synchronized axis: up to 8 axes
Performance: 4 synchronized axis in 2 ms
1 SUB-D port (15-way female): master encoder
(incremental or SSI)
1 USB-A port: program transfer
1 USB-B mini-port: software programming
1 RJ45 port: RS232/RS485 serial link
+ 2 free PCI slots for optional communication modules
Advanced features :
Master encoders Master/slaves
Virtual Axis
Capture Input / Reflex outputs (4)
Expandable digital or analog compact or slice inputs
/outputs modules.
Performance CANmotion LMC058 Schneider Electric 164