Compact / CANmotion /Motion Controller ... - Schneider Electric
Compact / CANmotion /Motion Controller ... - Schneider Electric
Compact / CANmotion /Motion Controller ... - Schneider Electric
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Lexium SD3<br />
Introduction<br />
Note<br />
The SD328 parameters can be entered or modified via the local control panel on the<br />
front of the device. Before you could start the drive configuration with SoMachine it is<br />
mandatory to set a CANopen address and a Baudrate.<br />
If this is not a new drive it is recommended to return to the factory settings. If you need<br />
instructions on how to do this, please read the drive documentation.<br />
CANopen<br />
settings<br />
1 If the drive is started for the first time, the FSu (First Setup) starts. Then CANopen<br />
(CAno) must be set and the CANopen address (CoAd) and the baudrate (Cobd).<br />
If the drive is not started for the first time, follow the steps underneath to change the<br />
address or the baudrate.<br />
In this project the CANopen address for the drives are 1 + 2. The Baudrate for the<br />
drives is 1000 kBaud.<br />
2<br />
Performance <strong>CANmotion</strong> LMC058 <strong>Schneider</strong> <strong>Electric</strong> 132