Compact / CANmotion /Motion Controller ... - Schneider Electric

RotaryKnife_Motion
The RotaryKnife_Motion function block controls a
machine that performs an operation, on the fly, on a
moving part.
Typical operations can include:
Cutting
Sealing
Marking
The RotaryKnife_Motion function is required for moving
the operational axis to synchronize it with the forward
motion of the part.
This introduces the concept of master and slave axis.
Master: moves the part forward
Slave: performs the operation
The figure below gives an example of a Rotary Knife application. Master axis is a linear axis type whereas the
axis slave is a rotary axis.
Performance CANmotion LMC058 Schneider Electric 150