Compact / CANmotion /Motion Controller ... - Schneider Electric

Appendix
The Packaging Application
Introduction
Different machines and processes share the same initial requirements that can be implemented
with a generic architecture employing the current Schneider Electric product offer. These generic
architectures include power supply, controller, motion, visual indication, communication and
functional machine safety aspects. The use of these generic architectures to implement
customer solutions covers not only cover a large section of customer automation requirements
but allows the implementation of a tested and validated software and hardware solution.
This chapter describes the Schneider Electric application function blocks, running on the
architecture described here. This document does not provide a functional description for
application solutions. The functions listed here are not comprehensive and form only a
foundation for real life applications. It is not intended to provide an application that fulfills a real
life situation in all aspects.
The information given here is intended to give the user a brief overview of the function blocks,
which are running on the described architecture. For additional information concerning the
Packaging Application Function Blocks please refer to the SoMachine help.
It is expected that the reader has at least a basic knowledge of the industrial application for
which these function blocks are provided and understands the professional jargon normally
used in that type of application. This document is not an introduction into the specific type of
industrial application for which this solution is provided.
Note :
The packaging application function blocks can only be used with S-type controllers.
If you use G-type controllers, the message "Use of is not authorized with the
current type of device" appears during the build phase.
Performance CANmotion LMC058 Schneider Electric 140