(8.5x11) 6000 Manual Cover - Newport Corporation

(LOCAL)
SHIFT
STO REF
DISP
REF SEL
FILTER
λ
ZERO
RANGE
AUTO
CH A
CH B
O
I
EXT
R/S
MENU
MODE
ENTER
UNITS
ESC
STATS
R/S A
R/S B
Figure 3 – Front Panel Key Pad
Table 2 – Top Level Key Functions and Associated Remote Commands
Keypad Remote Commands Description
O I
None Turns the Model 2832-C on and off.
(LOCAL)/ None If the meter is in the remote mode,
SHIFT
depressing this key puts the meter into
the local mode. Also, this key enables the
blue key functions.
DISP DISP, DISP? Cycles display brightness:
OFF,LOW,NORM and HIGH.
FILTER FILTER_n, FILTER_n? Cycles signal filtering:
OFF, ANLG, DIG and ANLG+DIG.
ZERO ZERO_n, ZERO_n?, Zeroes the display via offset subtraction.
STOZERO_n, ZEROVAL_n?
AUTO AUTO_n, AUTO_n? Turns automatic gain ranging on and off.
CH A DISPCH, DISPCH? Selects channel A as the primary display
channel.
CH B DISPCH, DISPCH? Selects channel B as the primary display
channel.
STO REF STOREF_n, STOREF_n? Stores last reading for future dB and
REL measurements.
REF SEL REFSEL_n, REFSEL_n? Selects the reference source to be used
for dB and REL measurements.
λ LAMBDA_n, LAMBDA_n? Displays and edits the calibration
wavelength in use.
RANGE RANGE_n, RANGE_n? Displays signal gain range in use.
, None Adjusts gain range or parameter
values or moves through a list.
R/S RUN, STOP Toggles the signal acquisition of
both channels.
MODE MODE_n, MODE_n? Cycles meter between allowed
measurement modes.
UNITS UNITS_n, UNITS_n? Cycles display measurement units
between those allowed.
STATS
STSIZE_n, STSIZE_n?, STMAX_n? Displays statistics.: Max, Min,
STMIN_n?, STMXMN_n? Max-Min, Mean and Std. Dev.
STMEAN_n, STSDEV_n?
R/S A RUN_A, RUN_A? Starts and stops channel A signal
acquisition.
6