(8.5x11) 6000 Manual Cover - Newport Corporation

CH?
Available Channel Query
Syntax: CH?
Parameters: None
Function:
This query is used to see which channels are available in the meter. A
channel is available if a calibration module was plugged into that channel on
powerup and passed the self test.
Returns:
is of type in the double quote format. The possible
values of are:
“A” - only channel A is available
“B” - only channel B is available
“AB” - Both channel A and B are available
Related Commands: None
DETMODEL_n?
Detector Model Query
Syntax: DETMODEL_n?
where n is either A or B
Parameters: None
Function:
This query returns the model number of the detector that belongs to the
memory module attached to the specified channel.
Returns:
is of type in the double quote format.
Related Commands: ATTNSN_n?, CALDATE_n?, DETSN_n?
DETSN_n?
Detector Serial Number Query
Syntax: DETSN_n?
where n is either A or B
Parameter: None
Function:
This query returns the serial number of the detector that belongs to the
memory module attached to the specified channel.
This serial number must match the serial number of the detector attached to
the 2832-C.
Returns:
is of type in the double quote format.
Related Commands: ATTNSN_n?, CALDATE_n?, DETMODEL_n?
51