30.12.2014 Views

document title / titre du document TRP W ORK PLAN ... - emits - ESA

document title / titre du document TRP W ORK PLAN ... - emits - ESA

document title / titre du document TRP W ORK PLAN ... - emits - ESA

SHOW MORE
SHOW LESS

You also want an ePaper? Increase the reach of your titles

YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.

<strong>TRP</strong> Work Plan 2005-2007<br />

Description of Activities<br />

TEC-SB/7935/dc<br />

12/Feb/09<br />

5.6.2 - On-Board Equipment Technologies (Source: <strong>TRP</strong> 2000-2003)<br />

<strong>TRP</strong> Reference:<br />

03/ETM-001<br />

SAW Filter Development (original activity: SAW resonator technology for L and S-band<br />

Title:<br />

space applications)<br />

Surface Accoustic Wave (SAW) quartz resonators are often used in Voltage Controlled Oscillator (VCO) with demanding<br />

phase noise requirements. However, the use of SAW resonator based VCOs (SAWR-VCO) has so far mainly been limited to<br />

frequencies below 1 GHz for very high Q applications. The use of SAW resonators at higher frequencies and on other<br />

materials has been demonstrated in the MATOPS program for the use in low-loss impedance element filters (IEF). For both<br />

SAW-IEF and SAWR-VCO the main goal in design of the resonators is to achieve high resonator Q-values.<br />

The proposed activity aims at investigating and improving SAW resonator technology for use in VCOs in the 1-2.5 GHz range.<br />

There are several space applications of low-phase noise VCOs in navigation and communication systems operating in this<br />

frequency range. The results will also be applicable for narrowband low-loss filters and SAW notch filters.<br />

In particular, the study will focus on:<br />

• Analysis of material and design limitations of high-frequency, high-Q quartz resonators; other materials, such as Langasite<br />

(with lower intrinsic material loss), or other low-loss wave modes (STW).<br />

• Evaluation of high-Q resonators design aspects.<br />

• Breadboarding (design and development) of a SAW resonator, including manufacturing and testing of critical components<br />

and technologies; evaluation of specific manufacturing processes issues.<br />

• Evaluation of possible applications of a SAW resonator in VCO.<br />

This activity is proposed as a special measure to Norway.<br />

Deliverables:<br />

Current TRL: Target TRL: Application Need/Date:<br />

Application/Mission:<br />

Contract Duration:<br />

SW Clause : - Dossier0 Ref.:<br />

Consistency with Harmonisation<br />

Roadmap and Conclusions:<br />

<strong>TRP</strong> Reference:<br />

Title:<br />

SAW Filter Development (original activity: SAW resonator technology for L and S-band<br />

space applications)<br />

Deliverables:<br />

Current TRL: Target TRL: Application Need/Date:<br />

Application/Mission:<br />

Contract Duration:<br />

SW Clause : - Dossier0 Ref.:<br />

Consistency with Harmonisation<br />

Roadmap and Conclusions:<br />

Page 116 of 227

Hooray! Your file is uploaded and ready to be published.

Saved successfully!

Ooh no, something went wrong!