document title / titre du document TRP W ORK PLAN ... - emits - ESA

s
TRP WORKPLAN 2005-2007
Complete List of Activities
issue 1 revision 0
page 3 of 5
(judged in terms of quantity indicated as guidelines of the ITT on
which the C(4) measure is applied). Offers shall provide an
analysis of the potential advantages of the proposed
participation (e.g. long-term rospects for future work). If no such
participation is offered, the bid shall contain evidence of the
effort made to meet these requirements and the reasons for the
lack of success. (Otherwise, the bid will not be considered for
further evaluation).
C(R) = Competition is restricted to a few companies, indicated in the
"Remarks'' column; (Ref. Article 5.2 ESA Contract Regulations).
DN/S = Direct Negotiation/Specialisation; the contract will be awarded
by direct negotiation in implementation of a defined industrial
policy or resulting from a sole supplier situation (Ref. Articles
6.1.A,D,F ESA Contract Regulations).
DN/C = Direct Negotiation/Continuation; the contract will be awarded in
direct negotiation being the immediate continuation of a previous
activity with the same contractor (Ref. Article 6.1.C ESA
Contract Regulations)
Country:
Remarks:
Prime contractor country
Provides information on Prime contractor and sub-contractors in case the
activity is contracted or gives other additional info.
Chapter 3 provides the descriptions of the activities. The Technology Activity Template provide
following information:
Description:
Deliverables:
Current TRL:
Target TRL:
Describes the activity, providing the context information, the purpose of
the activity and the main tasks.
Provides short description of the tangible outcome e.g. breadboard,
demonstrator, S/W, test data. A final report is standard for every
activity.
Describes the current NASA TRL level of the product that is going to be
developed in this activity.
The NASA TRL level expected for the product at the end of the activity.
For equipments TRP usually concludes with TRL 3, GSTP at level 5/6.
However in the case of components target TRL level in TRP could be
higher. It is also understood that TRL levels do not apply to S/W and tools.