AS-3640

Pos: 77 /Bedienungsanleitungen/Geräte neutral/8.0_Ü1_Service @ 0\mod_1251192378636_912.doc @ 3024 @ 1
• Select the „Local Area Connection” and click onto “Change Settings
of this connection”.
• Deactivate the item “Internet Protocol Version 6 (TCP/IPv6)” and
then select the “Internet Protocol Version 4 (TCP/IPv4)” and click
onto “Properties” (see Figure 62)
• Select “Use the following IP address:” and enter the following
values (see Figure 63):
IP address: The first three parts of the address must be the same
as in the printer. The last part must be different!
Subnet mask: Same as in the printer.
Default gateway: Must be the same as the IP address in the
printer.
• Click onto “OK” and wait until the connection to the printer is
established.
Figure 62: Local Area Connection Properties
Figure 63: TCP/IPv4 settings
5. Install and
configure the
printer driver
• Install and configure the printer driver for your printer model as
described in chapter 7.1 on page 109.
User Manual Version 3.1 121