AS-3640
AS-3640
AS-3640
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Pos: 132 /Bedienungsanleitungen/Geräte spezifisch/Feeder/11.1_Ü2_Feeder einstellen_kompakt_FD-13/FD-15 @ 1\mod_1259175153117_912.doc @ 7920 @ 2<br />
11.13 How to adjust the Neopost FD-13/FD-15 Feeder to the<br />
medium<br />
This instruction is just a short excerpt of the Neopost Feeder user manual. For detailed<br />
instructions please refer to this specific document.<br />
The Neopost Feeder is an optional accessory device that can be used in combination with<br />
the Neopost <strong>AS</strong>-<strong>3640</strong> printer. Please see chapter 3.5.5, on page 23 for further information.<br />
Adjusting the<br />
separation<br />
rollers to the<br />
media<br />
thickness<br />
• Loosen the wing grips (F1) of the paper side guides and push<br />
these all the way outwards (see Figure 1).<br />
• Check that both outer adjustment knobs (F2) of the separator<br />
system are centered ( ••• -Position ). Unlock the separator system<br />
by turning the separation lock knob (F3) clockwise (see Figure 2).<br />
• Lift up the separator rollers by use of the loose separation lock<br />
knob (F3). Put one sheet of the paper under the separation rollers<br />
and drop them again (see Figure 3).<br />
• Lock the separator system by turning the center separation lock<br />
knob (F3) counter-clockwise and remove the medium.<br />
Depending on the fed paper and its thickness: widen the<br />
separation gap by turning both outer adjustment knobs (F2)<br />
clockwise (see Figure 4).<br />
F1<br />
F2<br />
F4<br />
F3<br />
Figure 84: Separator system<br />
Figure 85: Feeder<br />
adjustment I<br />
Figure 86: Feeder<br />
adjustment II<br />
Figure 87: Feeder<br />
adjustment III<br />
194 User Manual Version 3.1
Change language