AS-3640

More documents

Recommendations

Info

Pos: 133 /Bedienungsanleitungen/Geräte spezifisch/Drucker/11_x_Ü2_Additional information texts in main display_Systeme @ 1\mod_1264070368112_912.doc @ 10550 @ 2 Filling the paper stack • If not already done, fan out a small stack of products (approximately 25 mm / 1”) and put it between the paper side guides (F7). The fanning out ensures that the media are gripped effectively by the feed roller (F9) and that no multiple sheets are fed. • The paper stack should adapt to the shape of the fixed separation roller (F8) (see Figure 6). • Fill the stack up to a convenient height for your particular medium. Paper format, stack height The height of the stack may be limited, due to the size of the media and the weight of the stapled products. 196 User Manual Version 3.1
11.14 Additional display texts Under certain circumstances, additional information texts may be shown in the main display. In the table below you find descriptions for the different information texts. Information in main display Test WaitEOT NoData! PapRUN NoPaper R&P Mode R&P&V R&A&P CleanHds Description The printer is running test prints. A pause command was sent to the printer. It will only continue with the print job, when the Ok key is pressed. The data for a page was not sent completely to the printer. The printer is running a paper run test. Data but no paper. E.g. the feeder is empty. Only occurs in a specific, non-standard printer mode. This text is shown when the Read and Print mode is active. In this mode the printer receives the data for each page, only after the data was read by an external device (e.g. a camera or a barcode reader). At typical application is the use of the printer behind an inserter machine. This mode allows specific settings for status feedbacks by the printer and handling of no data events. Only occurs in a specific, non-standard printer mode. This text is shown when the Read and Print and Verify mode is active. This mode works like the Read and Print mode, plus each page must be verified as “ok” after the printer, otherwise the page will be flagged as faulty. A faulty page could for example be diverted after the printer. Only occurs in a specific, non-standard printer mode. This text is shown when the Read and Acknowledge and Print mode is active. This mode works like the Read and Print mode, plus each page must be acknowledged as “ok” right before the printer, otherwise the page will be flagged as faulty. A faulty page could for example be diverted after the printer. Only occurs in a specific, non-standard printer mode. This text is shown as answer, to a clean heads request, sent over the serial port. This request can only be used when one of the Read and X modes is active. User Manual Version 3.1 197
Page 1 and 2:
AS-3640 ADRESS PRINTER User Manual
Page 3 and 4:
Pos: 3 /[Allgemeines]/0.0a_Note_Tra
Page 5 and 6:
4.5.5 How to activate the emergency
Page 7 and 8:
Pos: 6 /[Allgemeines]/0.3_Abbildung
Page 9 and 10:
Figure 36: Encoder Pattern ........
Page 11 and 12:
Pos: 8 /Bedienungsanleitungen/Gerä
Page 13 and 14:
Pos: 13 /Bedienungsanleitungen/Ger
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
2: Ink costs and ink range This lin
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
CENTAUR SEARCH ....................
Page 49 and 50:
Pos: 75.3 /Bedienungsanleitungen/Ge
Page 51 and 52:
Page 53 and 54:
Pos: 75.15 /Bedienungsanleitungen/G
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Figure 24: Adjustment of encoder ne
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
PRINT MIRRORED When set to on, all
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Relay 1 OUTPUT This feature is used
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88:
Page 89 and 90:
Pos: 75.103 /Bedienungsanleitungen/
Page 91 and 92:
Page 93 and 94:
Page 95 and 96:
Page 97 and 98:
Page 99 and 100:
Page 101 and 102:
Page 103 and 104:
n n c1 c2 Figure 40: Pattern A with
Page 105 and 106:
Page 107 and 108:
Page 109 and 110:
Page 111 and 112:
2. Connect the PC to the printer
Page 113 and 114:
Page 115 and 116:
Correct IP address syntax Don’t e
Page 117 and 118:
7.3.2.1 Using a fixed IP address 1.
Page 119 and 120:
Page 121 and 122:
Page 123 and 124:
8.1.2 How to clean an ink cartridge
Page 125 and 126:
Page 127 and 128:
Page 129 and 130:
Page 131 and 132:
Page 133 and 134:
Page 135 and 136:
Page 137 and 138:
Page 139 and 140:
Page 141 and 142:
Page 143 and 144:
Page 145 and 146: Pos: 101.37 /Bedienungsanleitungen/
Page 153 and 154: Pos: 103 /Bedienungsanleitungen/Ger
Page 155 and 156: Pos: 104.8 /Bedienungsanleitungen/G
Page 167 and 168: Pos: 115 /Zubehör/AS-OrbitBase/R20
Page 179 and 180: Pos: 123 /Serviceanleitungen/Gerät
Page 181 and 182: 11.5 How to create a print file Dep
Page 183 and 184: Install the printer driver first Pl
Page 185 and 186: 4 • Enable “Send to printer”
Page 187 and 188: 11.8 How to position the paper sens
Page 189 and 190: The statical Teach-in mode (TM/TB)
Page 195: Narrow media and unused separation
Page 203 and 204: Decap Time Default configuration Di
Page 205 and 206: Paper recognition Paper Sensor Pape
Page 209 and 210: === Ende der Liste für Textmarke I
show all

AS-3640

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?