AS-3640
AS-3640
AS-3640
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pos: 90 /Bedienungsanleitungen/Geräte spezifisch/8.2b_Sicherungswechsel_250V 2.5A T_EG2008.049_ohne Schalter @ 2\mod_1267189327726_912.doc @ 12601 @<br />
Pos: 91 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Troubleshooting (all printers)/Printing/8.2.X_Ü3_Weak_printout_due_to_worng_ink_type_selected_ALL PRINTERS @ 2\mod_1276846566086_912.doc @ 18721 @ 3<br />
Pos: 92 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Troubleshooting (all printers)/8.2.4_Ü3_Ink_on_transport_belt_after_test_print_<strong>AS</strong>-OrbitBase @ 2\mod_1265645246882_912.doc @ 11718 @ 3<br />
Fuse exchange for the <strong>AS</strong>-<strong>3640</strong> conveyor belt:<br />
Fuse exchange<br />
Attention!<br />
Disconnect the device from the power outlet before exchanging the<br />
fuses.<br />
Data<br />
Type<br />
Dimensions<br />
Voltage<br />
Glass tube microfuse<br />
5 x 20 mm<br />
250 V<br />
Amount 2<br />
2.5 A (T)<br />
Figure 2: Exchange of the fuses<br />
Use a flat screwdriver to swing open the fuse holder cover. Take the<br />
holder out of the power input module. Both fuses need to be intact.<br />
Change the blown fuses and insert the holder again.<br />
8.2.2 No or only very weak printout with new ink cartridges<br />
Condition Problem Solution<br />
No printout can be seen on<br />
the material or the printout<br />
has very little contrast.<br />
Although the cartridges are<br />
new and a high print quality<br />
is set.<br />
The wrong ink type is<br />
selected.<br />
Make sure to select correct<br />
inky type in the printer menu<br />
for the ink cartridges used in<br />
the printer. If the used ink<br />
type is not known select u<br />
USER INK as ink type in the<br />
printer menu.<br />
PRINTER CONFIG. > INK ><br />
SET INK TYPE ><br />
u USER INK<br />
128 User Manual Version 3.1