AS-3640

Pos: 35 /Bedienungsanleitungen/Geräte spezifisch/Drucker/AS-OrbitBase/3.3.1_Warnhinweis Netzkabel @ 2\mod_1265888781005_912.doc @ 11903 @
Pos: 36 /Bedienungsanleitungen/Geräte spezifisch/Drucker/AS-3060A/Ü3_3.3.3_Neopost_FD-13_Feeder_(optional)_AS-3060_AS-2060 @ 1\mod_1264412362375_912.doc @ 10834 @ 3
Pos: 37 /Bedienungsanleitungen/Geräte spezifisch/Drucker/AS-OrbitBase/3.3.5_Ü3_Additional devices @ 2\mod_1265908772620_912.doc @ 11996 @ 3
Pos: 38 /Bedienungsanleitungen/Geräte neutral/4.0_Ü1_Description of device @ 0\mod_1246003073544_912.doc @ 1919 @ 1
3.5.4 Connecting the power cable
Power cable
Attention!
The device may only be used in connection to power outlets with
integrated protective conductor (earthing)!
Make sure that the on/off switch off both the control unit and the
conveyor is set to off.
Plug the power cables into the power inputs of both devices connect
the cables to the power outlet.
3.5.5 Neopost FD-13/FD-15/ Feeder (optional)
For a detailed instruction on how to use the Neopost AS-3640 together with the optional
Neopost FD-13/FD-15 Feeder, please see chapter 11.12 on page 191 of this manual.
3.5.6 Additional devices
Please connect all upstream and downstream devices like the Neopost FD-13/FD-15 Feeder,
IR dryer or additional conveyor belts to the control unit of the AS-3640. Please see chapter
4.5.3 on page 36.
The Neopost AS-3640 has a emergency stop connection that assures a safe and convenient
stop of all connected devices, if a emergency stop button is pressed. Please see chapter 4.5
Emergency stop connection, on page 36 for additional information.
Grounding of all connected devices
Connect all upstream and downstream devices (e.g. feeder) with the
enclosed grounding cables.
Paper separation and transport may lead to electrostatic charging of
the devices, which can destroy electronics parts of the AS-3640.
User Manual Version 3.1 23