AS-3640
AS-3640
AS-3640
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Install the printer driver first<br />
Please make sure to install the printer driver before you connect to<br />
the printer to the PC. Make sure that the connection via the USB port<br />
is working correctly by printing sample pages before you attempt the<br />
flashware update.<br />
2. Preparation • Turn off the printer.<br />
• Connect the printer to an USB port of your PC.<br />
• Unpack the .zip file containing the flashware onto the hard disk of<br />
your PC.<br />
3. Put the<br />
printer into<br />
the update<br />
mode<br />
• Press the Ok , the Arrow left (Run paper) and the Arrow Up<br />
(Test Print) keys together and hold them.<br />
• While holding these three keys turn the printer on.<br />
• On the display the message Waiting for Download appears.<br />
4. Send the<br />
flashware file<br />
to the printer<br />
• Use the software tool PrintFile, as described below, to send the<br />
flashware to the printer.<br />
To update the flashware via an USB Port you will need the software tool PrintFile. This free<br />
software uses an installed printer driver to send the flashware file to your printer. Download<br />
your free copy at http://www.lerup.com/printfile/.<br />
Please perform the following steps, to send the flashware file to your printer:<br />
User Manual Version 3.1 183
Change language