AS-3640

Pos: 75.36 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü4_130302 / 130305_NOTE: Recommended adjustment sequence_AS-Orbit/AS_Orbit Base @ 3\mod_1281687130292_912.doc @ 25653 @
Pos: 75.37 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü4_130307_CORR. U1 C2-3 @ 0\mod_1254842367442_912.doc @ 4657 @
Pos: 75.38 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü4_130309-130310_CORR. U2 C1-2 / U2 C2-3 / U3 C1-2 /U3 C2-3 / U4 C1-2 / U4 C2-3_AS-2060/Orbit/OrbitB @ 0\mod_1254908701962_912.doc @ 4791 @
CORR. U1 C1-C2
Here offset values between the cartridge C1 and C2 of print unit U1 can be set. The
correction function is comparable to that of the menu item “CORR. U1-U2”.
The correction values can be adjusted in a range between +24 and -24. One
step = 0.08 mm ( 1 / 300 ’’). Use the PRINT CORR.PATT. test to analyze the offset between the
print units.
Positive values will shift the print start of cartridge C1 a step to the right (relatively to
cartridge C2), negative values will move it to the left (relatively to cartridge C2).
-24, -23, ... 0, ..., +23, +24
Default: 0
Recommended adjustment sequence
First verifying that the proper distance values (DIST. U1-U2, DIST.
U2-U3, DIST. U3-U4, in the PRINTER CONFIG. > DISTANCES menu)
have been set between print units.
Then provide the fine adjustments by setting the offset values
"between print units" (CORR. U1-U2, CORR. U2-U3, CORR. U3-U4)
before adjusting the offset values "between cartridges" (CORR. U1
C1-C2, CORR. U1 C2-C3) within a print unit.
CORR. U1 C2-C3
The (horizontal) correction between the cartridges C2 and C3 of print unit U1 can be set in
the same way as described in CORR. U1 C1-C2.
Default: 0
CORR. U2 C1-C2
(Will only be displayed in systems with 2 and more print units).
Same function as in CORR. U1 C1-C2.
Default: 0
CORR. U2 C2-C3
(Will only be displayed in systems with 2 and more print units).
Same function as in CORR. U1 C1-C2.
Default: 0
User Manual Version 3.1 65