AS-3640
AS-3640
AS-3640
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pos: 101.29 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/30_RAM_ERROR_Call_Service @ 2\mod_1265618941710_912.doc @ 11350 @<br />
Pos: 101.30 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/31_PRINTER_ERROR_WRONG_BOARD/FIRMWARE @ 2\mod_1265618996662_912.doc @ 11353 @<br />
Pos: 101.31 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/32_MACRO_LOADING_ERROR_RAM_MEMORY_IS_FULL! @ 2\mod_1265619042535_912.doc @ 11356 @<br />
Pos: 101.32 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/33_MACRO_TOO_HIGH_Reduce_to_#_Inches @ 2\mod_1265619098268_912.doc @ 11359 @<br />
Protocol<br />
code<br />
Display message<br />
029 ERROR CARTRIDGE # CHECK<br />
CONNECTION!<br />
CODE: 29<br />
Cause<br />
Connection between cartridge<br />
contacts and pen board contacts<br />
is faulty<br />
Elimination • Take out the Cartridge and clean the contacts of the Cartridge and<br />
the contacts in the pen board. Insert the Cartridge again and press<br />
the Ok button. The printer will do another connection test.<br />
If the contact problem could not be solved, the message THE<br />
PROBLEM IS NOT SOLVED! may appear. Please try another ink<br />
Cartridge.<br />
If the problem is still not solved, call service.<br />
Protocol<br />
code<br />
Display message<br />
030 RAM ERROR CALL SERVICE<br />
CODE: 30<br />
Cause<br />
RAM error on CPU board<br />
Elimination • Call service<br />
Protocol<br />
code<br />
Display message<br />
031 PRINTER ERROR WRONG<br />
BOARD/FIRMWARE<br />
CODE: 31<br />
Cause<br />
Board – Firmware – PCB do not<br />
match<br />
Elimination • Load the correct firmware<br />
version<br />
Protocol<br />
code<br />
Display message<br />
032 MACRO LOADING ERROR RAM<br />
MEMORY IS FULL!<br />
CODE: 32<br />
Cause<br />
Insufficient memory for the<br />
macro<br />
Elimination • Reduce the size of the macro<br />
User Manual Version 3.1 143
Change language