AS-3640
AS-3640
AS-3640
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pos: 131 /Bedienungsanleitungen/Geräte spezifisch/Drucker/<strong>AS</strong>-OrbitBase/11.1.1_Connecting_the_FD-13/FD-15_Feeder_<strong>AS</strong>-OrbitBase_ONLY_619 @ 2\mod_1276776658847_912.doc @ 18663 @<br />
11.12 How to connect the FD-13/FD-15 Feeder<br />
Position the feeder • Please assure that the products of the feeder are fed at the<br />
same height level as the <strong>AS</strong>-<strong>3640</strong> conveyor belt. Adjust the<br />
height of the feeder if necessary.<br />
• The products have to be placed on the conveyor belt in a<br />
straight-lined and parallel stream. Please align the feeder as<br />
needed.<br />
Connect the<br />
Neopost FD-13/FD-<br />
15 Feeder to the<br />
Neopost <strong>AS</strong>-<strong>3640</strong><br />
with the serial cable<br />
Connect the feeder with the serial cable 9200057S to the Neopost<br />
<strong>AS</strong>-<strong>3640</strong> as shown below.<br />
Figure 83: Serial connection between printer and feeder<br />
Connect the<br />
emergency stop<br />
systems<br />
Connect the emergency stop systems of both devices as described<br />
in chapter 3.5.5 on page 23.<br />
Order of turning on the devices<br />
Make sure to turn on the feeder before you turn on the printer.<br />
This ensures a correct recognition of the feeder by the printer.<br />
User Manual Version 3.1 193
Change language