AS-3640

Pos: 61 /Bedienungsanleitungen/Geräte spezifisch/Drucker/5.2b_How to install the ink cartridge_Allgemein @ 1\mod_1261387630600_912.doc @ 10024 @
5.2 How to install the ink cartridges
Cartridge mounting
The restraining lever ensures a safe contact between the ink cartridge
and the electronics of the AS-3640.
Please do not force the ink cartridge to its final position by hand
To avoid connection problems and damage, please install the
cartridge as seen in Figure 13 and Figure 14.
Figure 13: Inserting the ink cartridge into
the pen stall
Figure 14: Lock the restraining lever
Installing the
ink cartridge
Please put the cartridge into the mounting (pen stall), by cautiously
pushing it downwards in a straight movement. Do not force or press the
cartridge back into its pen stall by hand.
The cartridge should be in a slightly inclined position. The restraining
lever then tilts the cartridge into its final position.
• Open the restraining lever completely.
• Take the ink cartridge out of the packaging and remove the
protection tape from the print nozzles.
• Insert the ink cartridges one after another with the print nozzles
facing downwards - do not push in the direction of the restraining
lever.
• Lock the lever in direction of the arrow as shown in Figure 14.
Thus, the ink cartridge is tilted into its final position, and the
contact is established correctly.
Setting the ink
type
To ensure the best performance of the ink cartridge the correct ink type
must be set up in the printer. To set the ink type open the menu
PRINTER CONFIG. > INK > SET INK TYPE
Handling ink cartridges
Do not touch the contacts or the nozzle plate of an ink cartridge. This
may lead to reduced print quality.
User Manual Version 3.1 37