AS-3640

Pos: 75.47 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_1509_SERIAL BASE_OrbitBase, 620, 630 @ 1\mod_1256545841025_912.doc @ 7063 @
c
Pos: 75.48 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_1511_ORDER of UNITS @ 0\mod_1254908699962_912.doc @ 4763 @
UNIT of MEASUREM.
Here you can choose between „millimeter“ and „inch[feet/min]“ as unit of length. All
length and size settings in the printer will be displayed in the unit set in the menu.
SERIAL Base
This option is helpful for users who want to connect an additional upstream/downstream
Neopost CSV-810 (Base) conveyor. The print system can synchronize the start/stop and
speed signals for one conveyor.
Option
downstream
upstream
Note
The Neopost CSV-810 (Base)is installed behind the
print system (inline).
The Neopost CSV-810 (Base) is installed in front of
the print system (inline).
This menu is only shown when, a serial connected, Neopost CSV-
810 conveyor is detected by the printer.
ORDER of UNITS
If you wish to put two print units, of your printer, onto one mounting bar, you have to
choose U1=U3/U2=U4 in this menu. This setting will make sure that all the data are sent to
the printer at the correct time. This feature is useful when the space for mounting the print
units is limited or you require more space on the transportation system to mount additional
equipment, like a dryer. See Figure 33 to see the standard (default) mounting positions
and the U1=U3/U2=U4 mounting positions of the print units.
default, U1=U3/U2=U4
Default: default
Arrangement of print areas
When putting two print units onto one mounting bar the minimal
distance between the print area of unit U1 and unit U3 (unit U2 and
unit U4) is 154 mm.
User Manual Version 3.1 69