AS-3640
AS-3640
AS-3640
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Pos: 51 /Bedienungsanleitungen/Geräte neutral/4.6b_Ü2_(Ü3)_Emergency stop connection @ 0\mod_1254129198454_912.doc @ 3831 @ 2<br />
6 Input 1 / 2<br />
Signal inputs that can be used to<br />
send information to the printer<br />
(e.g. is the upstream device<br />
running)<br />
7 Emergency Stop<br />
Interfaces for emergency stop<br />
system (see next section for a<br />
detailed description)<br />
8 Servo Control<br />
Not used<br />
9 Belt Motor<br />
Connection for the Base conveyor<br />
belt motor<br />
15 Control<br />
16 Centaur<br />
17 Feeder<br />
18 TCP/IP<br />
Serial interface to the PC for<br />
control command, status feedbacks<br />
and service purposes. Cannot be<br />
used to send print data to the<br />
printer.<br />
Serial interface to the Neopost<br />
Centaur bulk ink system<br />
Serial interface to the Neopost<br />
feeder (start, stop, speed and gap<br />
determination)<br />
Ethernet (TCP/IP) interface for<br />
sending print data<br />
Belt Motor<br />
Connection for the <strong>AS</strong>-<strong>3640</strong> Control unit belt motor<br />
Emergency Stop<br />
Interface for the emergency stop connection (see chapter 4.5<br />
Emergency stop connection, on page 36).<br />
Interface Conveyor<br />
Not used<br />
EXT In/Out<br />
Not used<br />
Figure 12: Interfaces<br />
Base conveyor<br />
User Manual Version 3.1 33
Change language