AS-3640
AS-3640
AS-3640
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pos: 33 /Bedienungsanleitungen/Geräte spezifisch/Drucker/<strong>AS</strong>-2060/3.3.2_Ü3_Mounting_the_paper_guide_kit_<strong>AS</strong>-OrbitBase/Base @ 2\mod_1278332983547_912.doc @ 23833 @ 3<br />
Connection<br />
cable<br />
Control unit<br />
on shelf<br />
Encoder wheel<br />
Paper sensor<br />
Figure 6: Print unit connections<br />
Fixing of cables<br />
For a reliable operation of the printer, the safety screws of the cables<br />
between the print units and the control unit have to be fixed firmly.<br />
Do not interrupt this connection while the printer is powered<br />
on! Otherwise electronic parts can get damaged.<br />
Please be aware of the correct order of the print units and the paper<br />
sensor. The products have to pass the paper sensor before passing<br />
the print units (see Figure 6)!<br />
3.5.3 How to mount the Paper Guide Kit<br />
The paper guide kit supports an aligned feeding of the materials onto the transport belt. To<br />
mount the paper guide kit onto the Neopost <strong>AS</strong>-<strong>3640</strong>perform the following steps:<br />
• Place the two metal plates over the designated holes on the <strong>AS</strong>-<strong>3640</strong> (see Figure 8.).<br />
• Fix each plate with two screws.<br />
• Place the two bars with the guides into the metal plates (see Figure 8).<br />
• Move the two guides to the most outer positions, so that they do not yet interfere<br />
with the material flow when setting up the machine.<br />
User Manual Version 3.1 21
Change language