AS-3640
AS-3640
AS-3640
You also want an ePaper? Increase the reach of your titles
YUMPU automatically turns print PDFs into web optimized ePapers that Google loves.
Pos: 75.87 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_2202_AUTO PAP. SPEED @ 0\mod_1254914052452_912.doc @ 4891 @<br />
Pos: 75.88 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Menü_Drucker_Hinweis_only with Neopost Feeder @ 2\mod_1267706650377_912.doc @ 12990 @<br />
Pos: 75.89 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_2203_SEPARATION_nur LOG Geräte und Systeme mit ext. Feeder @ 0\mod_1254914049702_912.doc @ 4887 @<br />
TRANSPORT PARAM.<br />
Pos: 75.86 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Menüpunkte Drucker/Ü3/Ü4/Ü3_2201_PAPER SPEED_Only_<strong>AS</strong>-3060/OrbitBase/2060 @ 1\mod_1259769376423_912.doc @ 8081 @<br />
PAPER SPEED<br />
This feature is used to set the speed of the material transportation. Note that the speed of<br />
the transportation determines the level of print quality which can set. See table below.<br />
Option<br />
2000 mm/s 393.7 ft./min<br />
1800 mm/s 354.3 ft./min<br />
1500 mm/s 295.2 ft./min<br />
1080 mm/s 212.5 ft./min<br />
910 mm/s 179.0 ft./min<br />
720 mm/s 141.6 ft./min<br />
540 mm/s 106.2 ft./min<br />
420 mm/s 82.6 ft./min<br />
270 mm/s 53.1 ft./min<br />
120 mm/s 23.6 ft./min<br />
Possible print quality (dpi)<br />
1x3, 1x6<br />
1x3, 1x6, 2x3, 2x6<br />
1x3, 1x6, 2x3, 2x6<br />
1x3, 1x6, 2x3, 2x6, 3x3, 3x6<br />
1x3, 1x6, 2x3, 2x6, 3x3, 3x6<br />
1x3, 1x6, 2x3, 2x6, 3x3, 3x6<br />
1x3, 1x6, 2x3, 2x6, 3x3, 3x6, 6x3, 6x6<br />
1x3, 1x6, 2x3, 2x6, 3x3, 3x6, 6x3, 6x6<br />
1x3, 1x6, 2x3, 2x6, 3x3, 3x6, 6x3, 6x6<br />
1x3, 1x6, 2x3, 2x6, 3x3, 3x6, 6x3, 6x6<br />
Default: 2000 mm/s<br />
393.7 ft./min<br />
AUTO PAP SPEED<br />
This feature is used to set if and how the printer should control the feeding speed an<br />
integrated or of a serial connected feeder. This options works only with feeders which can<br />
be speed controlled by the print system.<br />
Option<br />
on<br />
off<br />
80%<br />
60%<br />
Note<br />
The printer controls the feeding speed according to<br />
the print and data throughput.<br />
No feeding speed control. Fixed speed.<br />
Feeding speed set to 80% of the maximum speed.<br />
Feeding speed set to 60% of the maximum speed.<br />
Default: on<br />
This options is only available when a Neopost FD-13/FD-15<br />
Feeder is connected to the print system.<br />
User Manual Version 3.1 85