AS-3640

Pos: 101.52 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/61_NO_CONFIGURATION_PCB_DETECTED @ 2\mod_1265620794400_912.doc @ 11435 @
Pos: 101.53 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/62_FIRMW./CONFIG_PCB_DOES_NOT_MATCH @ 3\mod_1293006012340_912.doc @ 28972 @
Pos: 101.54 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/63_ERROR:_Non_Existent_Macro_Selected @ 2\mod_1265620898465_912.doc @ 11441 @
Pos: 101.55 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/64_ERROR:_PEN_power_supply_damaged! @ 3\mod_1297873414116_912.doc @ 30391 @
Protocol
code
Display message
060 WRONG BULK INK BI !
CODE: 60
Cause
The BulkInk cartridge is not
suitable for the Centaur
## = BI1A, BI1B, BI2A, BI2B
Elimination • Exchange the BulkInk
cartridge with an original
BulkInk cartridge
Protocol
code
Display message
061 NO CONFIGURATION PCB
DETECTED!
CODE: 61
Cause
No PCB (printed circuit board)
detected
Elimination • Call service
Protocol
code
Display message
062 FIRMWARE/CONFIG PCB DOES
NOT MATCH!
CODE: 62
Elimination • Load the correct firmware;
make a default reset (press
and hold the home key
during power-on).
Cause
Firmware and PCB do not match
• Call service
Protocol
code
Display message
063 ERROR: NON-EXISTENTMACRO
SELECTED!
CODE: 63
Elimination • Do not repeat pages after a
job has ended
• Do not turn off the printer
during job data transfer
Cause
A print job selects a macro
which is not available (loaded)
in the printer
• Unlock the font in the printer
menu
• To interrupt a print job use
the Cancel and the Ok
keys on the printer
User Manual Version 3.1 149