AS-3640
AS-3640
AS-3640
Create successful ePaper yourself
Turn your PDF publications into a flip-book with our unique Google optimized e-Paper software.
Pos: 101.9 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/10a_BELT_MOTOR_JAM_<strong>AS</strong>-OrbitBase_3060A_2060 @ 2\mod_1265617793005_912.doc @ 11302 @<br />
Pos: 101.10 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/10b_FEED_MOTOR_JAMMED @ 2\mod_1265618016578_912.doc @ 11305 @<br />
Pos: 101.11 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/11_No_Print-Data!_Speed_too_high_only R&P @ 2\mod_1265618115520_912.doc @ 11308 @<br />
Pos: 101.12 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/12_No_INK!!_U#_C# @ 2\mod_1265618218243_912.doc @ 11311 @<br />
Pos: 101.13 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/13_CHECKSUM_ERROR_! @ 2\mod_1265618265761_912.doc @ 11314 @<br />
Protocol<br />
code<br />
Display message<br />
Cause<br />
010 BELT MOTOR JAMED!<br />
Elimination<br />
CODE: 10<br />
Turn off and disconnect the<br />
machine from the power supply<br />
before trying to eliminate this<br />
error!<br />
• Check if the transport belt can<br />
be moved by hand<br />
The movement of the transport belt<br />
is rough-running<br />
• Check if any paper is stuck<br />
under the belt<br />
• Check if the belt(s) is<br />
running in the correct<br />
position (all suction holes<br />
must be free)<br />
Protocol<br />
code<br />
Display message<br />
Cause<br />
010 FEED MOTOR JAMED! Ok TO<br />
CONTINUE!<br />
Elimination<br />
CODE: 10<br />
Turn off and disconnect the<br />
machine from the power supply<br />
before trying to eliminate this<br />
error!<br />
• Check if the feeding system<br />
can be moved by hand<br />
The movement of the feeding<br />
system is rough-running<br />
• Check if any paper is stuck in<br />
the machine<br />
Protocol<br />
code<br />
Display message<br />
Cause<br />
011 NO PRINT DATA! SPEED TOO<br />
HIGH<br />
CODE: 11<br />
Paper detected by paper sensor but<br />
no print data available<br />
(Can only occur in a Read&Print<br />
Mode)<br />
Elimination • Check reading device • Reduce transport speed<br />
Protocol<br />
code<br />
Display message<br />
Cause<br />
012 NO INK !! CHANGE CARTRIDGE<br />
CODE: 12<br />
Ink level counter has reached the<br />
set empty level<br />
Elimination • Insert a new ink cartridge and<br />
reset the ink level counter<br />
138 User Manual Version 3.1