AS-3640

More documents

Recommendations

Info

Pos: 101.9 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/10a_BELT_MOTOR_JAM_<strong>AS</strong>-OrbitBase_3060A_2060 @ 2\mod_1265617793005_912.doc @ 11302 @ Pos: 101.10 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/10b_FEED_MOTOR_JAMMED @ 2\mod_1265618016578_912.doc @ 11305 @ Pos: 101.11 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/11_No_Print-Data!_Speed_too_high_only R&P @ 2\mod_1265618115520_912.doc @ 11308 @ Pos: 101.12 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/12_No_INK!!_U#_C# @ 2\mod_1265618218243_912.doc @ 11311 @ Pos: 101.13 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/13_CHECKSUM_ERROR_! @ 2\mod_1265618265761_912.doc @ 11314 @ Protocol code Display message Cause 010 BELT MOTOR JAMED! Elimination CODE: 10 Turn off and disconnect the machine from the power supply before trying to eliminate this error! • Check if the transport belt can be moved by hand The movement of the transport belt is rough-running • Check if any paper is stuck under the belt • Check if the belt(s) is running in the correct position (all suction holes must be free) Protocol code Display message Cause 010 FEED MOTOR JAMED! Ok TO CONTINUE! Elimination CODE: 10 Turn off and disconnect the machine from the power supply before trying to eliminate this error! • Check if the feeding system can be moved by hand The movement of the feeding system is rough-running • Check if any paper is stuck in the machine Protocol code Display message Cause 011 NO PRINT DATA! SPEED TOO HIGH CODE: 11 Paper detected by paper sensor but no print data available (Can only occur in a Read&Print Mode) Elimination • Check reading device • Reduce transport speed Protocol code Display message Cause 012 NO INK !! CHANGE CARTRIDGE CODE: 12 Ink level counter has reached the set empty level Elimination • Insert a new ink cartridge and reset the ink level counter 138 User Manual Version 3.1
Pos: 101.14 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/14_CHECKSUM_ERROR_! @ 2\mod_1265896733283_912.doc @ 11938 @ Pos: 101.15 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/15_CHECKSUM_ERROR_! @ 2\mod_1265896765800_912.doc @ 11962 @ Pos: 101.16 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/16_CHECKSUM_ERROR_! @ 2\mod_1265896768206_912.doc @ 11966 @ Pos: 101.17 /Bedienungsanleitungen/Geräte spezifisch/Drucker/Error Messages/17_CHECKSUM_ERROR_! @ 2\mod_1265896783800_912.doc @ 11970 @ Protocol code Display message Cause 013 CHECKSUM ERROR ! MAKE DEFAULT RESET Error in buffered RAM CODE: 13 Elimination • Perform a default reset • If the error occurs again after the default reset call service Protocol code Display message Cause 014 CHECKSUM ERROR ! MAKE COUNTER RESET Error in buffered RAM CODE: 14 Elimination • Perform a default reset • If the error occurs again after the default reset call service Protocol code Display message Cause 015 CHECKSUM ERROR ! TESTMACRO RESET Error in buffered RAM CODE: 15 Elimination • Perform a default reset • If the error occurs again after the default reset call service Protocol code Display message Cause 016 CHECKSUM ERROR ! SETTING RESET Error in buffered RAM CODE: 16 Elimination • Perform a default reset • If the error occurs again after the default reset call service User Manual Version 3.1 139
Page 1 and 2:
AS-3640 ADRESS PRINTER User Manual
Page 3 and 4:
Pos: 3 /[Allgemeines]/0.0a_Note_Tra
Page 5 and 6:
4.5.5 How to activate the emergency
Page 7 and 8:
Pos: 6 /[Allgemeines]/0.3_Abbildung
Page 9 and 10:
Figure 36: Encoder Pattern ........
Page 11 and 12:
Pos: 8 /Bedienungsanleitungen/Gerä
Page 13 and 14:
Pos: 13 /Bedienungsanleitungen/Ger
Page 15 and 16:
Page 17 and 18:
Page 19 and 20:
Page 21 and 22:
Page 23 and 24:
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
2: Ink costs and ink range This lin
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Page 37 and 38:
Page 39 and 40:
Page 41 and 42:
Page 43 and 44:
Page 45 and 46:
Page 47 and 48:
CENTAUR SEARCH ....................
Page 49 and 50:
Pos: 75.3 /Bedienungsanleitungen/Ge
Page 51 and 52:
Pos: 75.7 /Bedienungsanleitungen/Ge
Page 53 and 54:
Pos: 75.15 /Bedienungsanleitungen/G
Page 55 and 56:
Page 57 and 58:
Page 59 and 60:
Page 61 and 62:
Figure 24: Adjustment of encoder ne
Page 63 and 64:
Page 65 and 66:
Page 67 and 68:
PRINT MIRRORED When set to on, all
Page 69 and 70:
Page 71 and 72:
Page 73 and 74:
Page 75 and 76:
Page 77 and 78:
Page 79 and 80:
Relay 1 OUTPUT This feature is used
Page 81 and 82:
Page 83 and 84:
Page 85 and 86:
Page 87 and 88: Pos: 75.95 /Bedienungsanleitungen/G
Page 89 and 90: Pos: 75.103 /Bedienungsanleitungen/
Page 103 and 104: n n c1 c2 Figure 40: Pattern A with
Page 109 and 110: Pos: 76.2 /Bedienungsanleitungen/Ge
Page 111 and 112: 2. Connect the PC to the printer
Page 115 and 116: Correct IP address syntax Don’t e
Page 117 and 118: 7.3.2.1 Using a fixed IP address 1.
Page 121 and 122: Pos: 77 /Bedienungsanleitungen/Ger
Page 123 and 124: 8.1.2 How to clean an ink cartridge
Page 137: Pos: 101.6 /Bedienungsanleitungen/G
Page 167 and 168: Pos: 115 /Zubehör/AS-OrbitBase/R20
Page 179 and 180: Pos: 123 /Serviceanleitungen/Gerät
Page 181 and 182: 11.5 How to create a print file Dep
Page 183 and 184: Install the printer driver first Pl
Page 185 and 186: 4 • Enable “Send to printer”
Page 187 and 188: 11.8 How to position the paper sens
Page 189 and 190:
The statical Teach-in mode (TM/TB)
Page 191 and 192:
Page 193 and 194:
Page 195 and 196:
Narrow media and unused separation
Page 197 and 198:
11.14 Additional display texts Unde
Page 199 and 200:
Page 201 and 202:
Page 203 and 204:
Decap Time Default configuration Di
Page 205 and 206:
Paper recognition Paper Sensor Pape
Page 207 and 208:
Page 209 and 210:
=== Ende der Liste für Textmarke I
show all

AS-3640

Create successful ePaper yourself

Delete template?

Save as template?