Silver Series Installation and Operation Manual, Rev B ... - Watlow

Using EZware-5000 111b. Save file as *.emi for extended memory files. You must use file names which correspond to the ten extended memory areas preconfigured inthe HMI (ex. em0.emi, em1.emi, …, em9.emi).c. Save file as *.csv to open the file in applications such as Microsoft Excel.12. Once the file is saved, you can copy the recipe file to your HMI by:a. Procedure 1-- Downloading the file using the Project Manager:i. With the computer connected to your HMI, click Transfer…Download.ii. On the Download dialog box, check the RW enable box, then select the recipe file.b. Procedure 2 -- Downloading using a SD card or USB Flash Drive:i. Attach an SD card or USB Flash Drive to your computer.ii. In Project Manager, click Build Download Data for CF/USB Disk button.iii. Select the folder to save download data. Enter the SD card or USB Flash drive location.iv. Check the Recipe (RW) enable box, then select the recipe file.v. Click the Build button. A folder called ‘mt8000’ is created on the root directory of yourdrive.vi. Remove the SD or USB drive and connect it to your HMI. If you are using more than one USB device, make sure that the USB Flash drive is connected first (this identifies theUSB Flash Drive as USB1).0600-0069-0000 Rev. B