Silver Series Installation and Operation Manual, Rev B ... - Watlow

Creating Windows 1274. Select the format from the drop down menu and click OK.5. Select the Window No. you want to call from the drop down menu under the Attribute heading.6. Click OK to return to the main screen of EasyBuilder. The mouse cursor will have a square object thatrepresents the size of the popup window.7. Place the Direct Window object where you want the popup window to appear.8. The Direct Window object should be the same size as the popup window it is calling. You can resize theobject after you have placed it by clicking on the object and dragging on the sizing handles or selecting theProfile tab in the Direct Window Object’s Properties window and adjusting the Width and Height settings.To call a popup window using the Indirect Window Object:1. From the Objects menu, select Indirect Window. The New Indirect Window Object dialog box appears.2. Select Click the Setting… button in the Read address section and select the PLC address according to Devicetype selected from the drop down menu and then enter the address.3. Select the format from the drop down menu and click OK.4. Click OK to return to the main screen of EasyBuilder. The mouse cursor will have a square object thatrepresents the size of the popup window.5. Place the Indirect Window object where you want the popup window to appear.6. The Indirect Window object should be the same size as the popup window it is calling. You can resize theobject after you have placed it by clicking on the object and dragging on the sizing handles or selecting theProfile tab in the Indirect Window Object’s Properties window and adjusting the Width and Height settings.0600-0069-0000 Rev. B