Silver Series Installation and Operation Manual, Rev B ... - Watlow

More documents

Recommendations

Info

68 Silver Series Programming ManualTime setting address + 2 Action mode Set Bit 0 to use end time.Clear Bit 0 and the Scheduler will notuse end time.Time setting address + 3 Start time (day) Bits 0-6 determine day of the weekthe Start Action is executed.Bit 0=Sunday; Bit 6=Saturday.Time setting address + 4 Start time (hour) This register determines the hour theStart Action is executed.Range is 0-23.Time setting address + 5 Start time (minute) This register determines the minutethe Start Action is executed.Range is 0-59.Time setting address + 6 Start time (second) This register determines the secondthe Start Action is executed.Range is 0-59.Time setting address + 7 End time (day) Bits 0-6 determine day of the weekthe End Action is executed.Bit 0=Sunday; Bit 6=Saturday.Note: If bit 0 of the Action Moderegister is clear, the Scheduler willnot execute the End Time action.Time setting address + 8 End time (hour) This register determines the hour theEnd Action is executed.Range is 0-23.Time setting address + 9 End time (minute) This register determines the minutethe End Action is executed.Range is 0-59.Time setting address + 10 End time (seconds) This register determines the secondthe End Action is executed.Range is 0-59.Drawing ToolsIncludes Line, Arbitrary Line, Link Line, Arc, Ellipse/Circle, Pie,Rectangle, Polygon, Scale, Text, Picture, Shape.Refer to the Help file for instructions in using each individual drawing tool (Help > Parts List > By Function > DrawingObjects).0600-0069-0000 Rev. B
Using EZware-5000 69Managing ProjectsLike most Windows application software, EasyBuilder will open, save, close, and print files using the standardwindows format.Opening, Editing ProjectsTo create a new project1. On the File menu, click New or click the New icon in the Standard toolbar. The EasyBuilder dialog boxappears.2. Select the HMI model that you intend to use with your project and whether you want to use the HMI inLandscape or Portrait mode (if available for your model). Select the Use template checkbox to open theproject with the default template for your selected model.3. Click OK. The System Parameter Settings window opens next. Refer to the Help menu “How Do I… Set Up aPLC or Controller in EasyBuilder?” to configure the devices in the Device List. You may also jump ahead to“Chapter 6 – Using EZware-5000” (System Parameter Settings on page 83). Click OK to accept the settings.To open an existing project1. On the File menu, click Open or click the Open icon in the Standard toolbar. The Open dialog box appears.2. Click on the project file you intend to open.3. Click Open. The main screen of EasyBuilder appears with the initial screen of the project displayed.To close a project:1. On the File menu, click Close.2. If changes have been made to the project file, EasyBuilder will ask you if you would like to save the project.Then the main screen of EasyBuilder will remain but with no work area displayed. You must now use theOpen or New commands to edit a project.To save an existing project1. On the File menu, click Save or click the Save icon in the Standard toolbar.2. If the project already has a name, then the project will automatically be saved. If this is a new project, thenthe Save As dialog box appears.0600-0069-0000 Rev. B
Page 1 and 2:
Silver Series Operator Interface Te
Page 3 and 4:
iiiTable of ContentsCOPYRIGHT NOTIC
Page 5:
vChapter 11 - Capturing Alarms and
Page 8 and 9:
2 Silver Series Programming ManualC
Page 10 and 11:
4 Silver Series Programming ManualO
Page 13 and 14:
Introduction 7Video InInput and pla
Page 15 and 16:
HMI Local Setup 9The X-models (HMI5
Page 17 and 18:
HMI Local Setup 1110. Configure you
Page 19 and 20:
HMI Local Setup 1315. Click the VNC
Page 21 and 22:
HMI Local Setup 153. Click on the V
Page 23 and 24: Connect the HMI to the PLC or Contr
Page 35 and 36: Creating a Sample Project 292. Clic
Page 37 and 38: Creating a Sample Project 315. Sele
Page 39 and 40: Creating a Sample Project 33Now let
Page 43 and 44: Creating a Sample Project 373. In t
Page 45 and 46: Creating a Sample Project 3916. Pas
Page 47 and 48: Creating a Sample Project 413. In t
Page 49 and 50: Creating a Sample Project 4311. Cli
Page 55 and 56: Creating a Sample Project 492. Conn
Page 57 and 58: Simulator Mode 51Off-line simulatio
Page 59 and 60: Using EZware-5000 53Chapter 6 - Usi
Page 61 and 62: Using EZware-5000 55EasyBuilder-500
Page 63 and 64: Using EZware-5000 57Numeric InputTh
Page 65 and 66: Using EZware-5000 59Bar GraphThe Ba
Page 67 and 68: Using EZware-5000 61XY PlotThe XY P
Page 69 and 70: Using EZware-5000 63Alarm DisplayTh
Page 71 and 72: Using EZware-5000 65Write data to P
Page 73: Using EZware-5000 67When logging da
Page 77 and 78: Using EZware-5000 71Note: It is a g
Page 79 and 80: Using EZware-5000 73Using the Windo
Page 81 and 82: Using EZware-5000 75To zoom in on t
Page 83 and 84: Using EZware-5000 774. Objects cut
Page 85 and 86: Using EZware-5000 79To delete a gra
Page 87 and 88: Using EZware-5000 81Bottom Layer:Pr
Page 89 and 90: Using EZware-5000 83To rotate objec
Page 91 and 92: Using EZware-5000 85To configure De
Page 93 and 94: Using EZware-5000 87To configure th
Page 95 and 96: Using EZware-5000 89To configure Ge
Page 97 and 98: Using EZware-5000 91To configure Sy
Page 99 and 100: Using EZware-5000 93To configure Se
Page 101 and 102: Using EZware-5000 95LW9500,LW9501LW
Page 103 and 104: Using EZware-5000 97To configure th
Page 105 and 106: Using EZware-5000 99Automatically R
Page 107 and 108: Using EZware-5000 1017. Click the E
Page 109 and 110: Using EZware-5000 1032. Display Mil
Page 111 and 112: Using EZware-5000 105Converting Mul
Page 113 and 114: Using EZware-5000 107Options Menu >
Page 115 and 116: Using EZware-5000 109integer format
Page 117 and 118: Using EZware-5000 111b. Save file a
Page 119 and 120: Using EZware-5000 113Off-line Simul
Page 121 and 122: Using EZware-5000 1155. Click Unins
Page 123 and 124: Creating Windows 1173. The Open Win
Page 125 and 126:
Creating Windows 1194. Modify the w
Page 127 and 128:
Creating Windows 121Assigning Under
Page 129 and 130:
Creating Windows 1232. Highlight th
Page 131 and 132:
Creating Windows 1252. Click New...
Page 133 and 134:
Creating Windows 1274. Select the f
Page 135 and 136:
Creating Windows 129 Placing a Clos
Page 137 and 138:
Creating Windows 131When Above base
Page 139 and 140:
Creating Windows 133When the HMI in
Page 141 and 142:
Creating Windows 135Using the Fast
Page 143 and 144:
Creating Windows 137The amount of a
Page 145 and 146:
Creating and Using Databases and La
Page 147 and 148:
Page 149 and 150:
Page 151 and 152:
Page 153 and 154:
Using and Creating Keypads 1472. Us
Page 155 and 156:
Using and Creating Keypads 149Editi
Page 157 and 158:
Bar Graphs, Meters, and Trends 151C
Page 159 and 160:
Bar Graphs, Meters, and Trends 1536
Page 161 and 162:
Page 163 and 164:
Bar Graphs, Meters, and Trends 157C
Page 165 and 166:
Page 167 and 168:
Page 169 and 170:
Bar Graphs, Meters, and Trends 163T
Page 171 and 172:
Bar Graphs, Meters, and Trends 165D
Page 173 and 174:
Capturing Alarms and Events 167Chap
Page 175 and 176:
Capturing Alarms and Events 1699. C
Page 177 and 178:
Capturing Alarms and Events 1718. C
Page 179 and 180:
Capturing Alarms and Events 173To c
Page 181 and 182:
Security 175Chapter 12 - SecurityTh
Page 183 and 184:
Security 177Object SecurityMany obj
Page 185 and 186:
Security 179When Interlock is enabl
Page 187 and 188:
Security 181Additional Security Fea
Page 189 and 190:
Security 183XOB PasswordA project (
Page 191 and 192:
Security 185System PasswordsThe Sys
Page 193 and 194:
Security 187Upload Password: The pa
Page 195 and 196:
Security 189Upload (History) Passwo
show all

Silver Series Installation and Operation Manual, Rev B ... - Watlow

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?