Silver Series Installation and Operation Manual, Rev B ... - Watlow

Using EZware-5000 774. Objects cut or copied from one window can be pasted into other windows. Once the object has beenselected and cut or copied, open another window, then paste the object into that window.5. The pasted object appears highlighted in the upper leftmost corner of the work area.6. Move the object by clicking on the highlighted area and dragging it to the desired position.Using the Multi-Copy commandThe Multi-Copy command is used to make multiple copies of a single object on a screen. This is most useful whencreating new keyboards or data tables. In addition to copying the object, this command will automatically assign newmemory addresses to each object.1. Select the object you wish to copy.2. From the Edit menu, select Multi. Copy.... The Multi. Copy dialog box appears.3. Modify the settings according to your requirements.4. Click OK. The main screen of EasyBuilder is redisplayed with the Multi. Copy command executed.Multiple objects can be created according to these parameters:Pitch vs. Interval: This setting affects how EasyBuilder places the copies of an object on the screen relative to eachother. The Pitch setting will interpret the X Distance setting as the distance from the left side of an object to the leftside of the next object and the Y Distance setting as the distance from the top of one object to the top of anotherobject.The Interval setting will interpret the X Distance setting as the distance from the right side of one object to the leftside of the next object. The Y Distance setting is the distance from the bottom of one object to the top of the nextobject.0600-0069-0000 Rev. B