Silver Series Installation and Operation Manual, Rev B ... - Watlow

Security 175Chapter 12 – SecurityThe security feature in EasyBuilder-5000 allows you to create up to 12 users with individual passwords and assign upto 6 different access levels to each user. Access to windows and even individual objects can be secured so onlyindividuals logged in with the correct access levels can operate certain functions.System Parameter Settings Security tabThe security feature is enabled in the System Parameters. Open the System Parameter Settings (Edit > SystemParameters) and click on the Security tab. Check the Enable box for each user you want to configure with securityaccess. Enter a password for each user and check the boxes for the access level assigned to each user.Note: There is no priority in assigning access levels. For example, access level F doesn’t automatically provide accessto levels A-E. In many cases, you will want higher security levels to include access to lower security levels. In thescreen shot above, Users 1 – 6 are assigned increasingly higher security levels, with each security level includingaccess to the security levels below it.0600-0069-0000 Rev. B