Silver Series Installation and Operation Manual, Rev B ... - Watlow

More documents

Recommendations

Info

152 Silver Series Programming Manual2. Use the Description: box to enter a title for the Bar Graph object. A description is not necessary but doeshelp you identify the purpose of the part.3. Click the Setting… button in the Read address frame. Select the device type from the drop down menu, andthen indicate the PLC register address. Select the data format.4. Click on the Outline tab to display the outline form.5. In the Attribute section, select how the Bar Graph is to operate.Function Option DescriptionType Normal The bar starts at one end of the object, and moves to the other end.Offset The bar starts at some non-zero point defined by the Origin, and moves through theorigin as the value changes.ZeroThe PLC Register values corresponding to an unfilled bargraph.OriginThe starting point of the bar when the Type is set to Offset.Direction Up The bargraph starts at the bottom of the object, and moves up as it fills.Down The bargraph starts at the top of the object, and moves down as it fills.Right The bargraph starts at the left of the object, and moves right as it fills.Left The bargraph starts at the right of the object, and moves left as it fills.SpanThe PLC Register values corresponding to a completely filled bargraph.Bar WidthThe percent of the object’s width that the bar occupies.0600-0069-0000 Rev. B
Bar Graphs, Meters, and Trends 1536. The Bar color/style determines the appearance of the Bar Graph.FunctionFrameBarBackgroundBar StyleDescriptionSet the color of the outside of the barSet the color of the filled part of the bar.Set the color of the unfilled part of the bar.Set the pattern of the filled part of the bar.7. Set up the Target indicator. This selects the color of the filled part of the bar when it reaches a preset value.FunctionDescriptionEnable When checked, the Target Indicator is active.Color Set the color to change the bar when the value is equal to the Target Value.Target Value The value at which to change the color of the bar.Tolerance Set a tolerance for the Target Value. When the value is less than or greater than the Target Valueby this value, the bar will remain in the selected color.8. Select the Alarm indicators colors.FunctionLow LimitLow ColorHigh LimitHigh ColorDescriptionThe value at which the bar will change to the Low Color.The color to change the bar when the value reaches the Low Limit.The value at which the bar will change to the High Color.The color to change the bar when the value reaches the High Limit.9. Set up Target/alarm/zero (span) dynamic address. When checked, this option allows certain alarm limits tobe read from the PLC / Controller. The Target value, and Low limit, and High limit fields are disabled. Data isread from the PLC as follows:Specified AddressSpecified Address + 1Specified Address + 2Low LimitHigh LimitTarget Value10. Once the part is placed onto the window, you can adjust the attributes of the Bar Graph by double-clickingon the part.Creating Meter DisplaysThe Meter Display Object is used to represent the data in a 16-bit or 32-bit PLC register as a scaled meter. The metercan be easily customized to the look that you want.The Meter Display can be configured with any base number that represents 0 level and any span range.To create a Meter Display Object:1. From the Objects menu, click Meter Display, or click the Meter Display icon in the Object 2 toolbar. The NewDisplay Meter Object dialog box appears.0600-0069-0000 Rev. B
Page 1 and 2:
Silver Series Operator Interface Te
Page 3 and 4:
iiiTable of ContentsCOPYRIGHT NOTIC
Page 5:
vChapter 11 - Capturing Alarms and
Page 8 and 9:
2 Silver Series Programming ManualC
Page 10 and 11:
4 Silver Series Programming ManualO
Page 13 and 14:
Introduction 7Video InInput and pla
Page 15 and 16:
HMI Local Setup 9The X-models (HMI5
Page 17 and 18:
HMI Local Setup 1110. Configure you
Page 19 and 20:
HMI Local Setup 1315. Click the VNC
Page 21 and 22:
HMI Local Setup 153. Click on the V
Page 23 and 24:
Connect the HMI to the PLC or Contr
Page 25 and 26:
Page 27 and 28:
Page 29 and 30:
Page 31 and 32:
Page 33 and 34:
Page 35 and 36:
Creating a Sample Project 292. Clic
Page 37 and 38:
Creating a Sample Project 315. Sele
Page 39 and 40:
Creating a Sample Project 33Now let
Page 41 and 42:
Page 43 and 44:
Creating a Sample Project 373. In t
Page 45 and 46:
Creating a Sample Project 3916. Pas
Page 47 and 48:
Creating a Sample Project 413. In t
Page 49 and 50:
Creating a Sample Project 4311. Cli
Page 51 and 52:
Page 53 and 54:
Page 55 and 56:
Creating a Sample Project 492. Conn
Page 57 and 58:
Simulator Mode 51Off-line simulatio
Page 59 and 60:
Using EZware-5000 53Chapter 6 - Usi
Page 61 and 62:
Using EZware-5000 55EasyBuilder-500
Page 63 and 64:
Using EZware-5000 57Numeric InputTh
Page 65 and 66:
Using EZware-5000 59Bar GraphThe Ba
Page 67 and 68:
Using EZware-5000 61XY PlotThe XY P
Page 69 and 70:
Using EZware-5000 63Alarm DisplayTh
Page 71 and 72:
Using EZware-5000 65Write data to P
Page 73 and 74:
Using EZware-5000 67When logging da
Page 75 and 76:
Using EZware-5000 69Managing Projec
Page 77 and 78:
Using EZware-5000 71Note: It is a g
Page 79 and 80:
Using EZware-5000 73Using the Windo
Page 81 and 82:
Using EZware-5000 75To zoom in on t
Page 83 and 84:
Using EZware-5000 774. Objects cut
Page 85 and 86:
Using EZware-5000 79To delete a gra
Page 87 and 88:
Using EZware-5000 81Bottom Layer:Pr
Page 89 and 90:
Using EZware-5000 83To rotate objec
Page 91 and 92:
Using EZware-5000 85To configure De
Page 93 and 94:
Using EZware-5000 87To configure th
Page 95 and 96:
Using EZware-5000 89To configure Ge
Page 97 and 98:
Using EZware-5000 91To configure Sy
Page 99 and 100:
Using EZware-5000 93To configure Se
Page 101 and 102:
Using EZware-5000 95LW9500,LW9501LW
Page 103 and 104:
Using EZware-5000 97To configure th
Page 105 and 106:
Using EZware-5000 99Automatically R
Page 107 and 108: Using EZware-5000 1017. Click the E
Page 109 and 110: Using EZware-5000 1032. Display Mil
Page 111 and 112: Using EZware-5000 105Converting Mul
Page 113 and 114: Using EZware-5000 107Options Menu >
Page 115 and 116: Using EZware-5000 109integer format
Page 117 and 118: Using EZware-5000 111b. Save file a
Page 119 and 120: Using EZware-5000 113Off-line Simul
Page 121 and 122: Using EZware-5000 1155. Click Unins
Page 123 and 124: Creating Windows 1173. The Open Win
Page 125 and 126: Creating Windows 1194. Modify the w
Page 127 and 128: Creating Windows 121Assigning Under
Page 129 and 130: Creating Windows 1232. Highlight th
Page 131 and 132: Creating Windows 1252. Click New...
Page 133 and 134: Creating Windows 1274. Select the f
Page 135 and 136: Creating Windows 129 Placing a Clos
Page 137 and 138: Creating Windows 131When Above base
Page 139 and 140: Creating Windows 133When the HMI in
Page 141 and 142: Creating Windows 135Using the Fast
Page 143 and 144: Creating Windows 137The amount of a
Page 145 and 146: Creating and Using Databases and La
Page 153 and 154: Using and Creating Keypads 1472. Us
Page 155 and 156: Using and Creating Keypads 149Editi
Page 157: Bar Graphs, Meters, and Trends 151C
Page 161 and 162: Bar Graphs, Meters, and Trends 1555
Page 163 and 164: Bar Graphs, Meters, and Trends 157C
Page 169 and 170: Bar Graphs, Meters, and Trends 163T
Page 171 and 172: Bar Graphs, Meters, and Trends 165D
Page 173 and 174: Capturing Alarms and Events 167Chap
Page 175 and 176: Capturing Alarms and Events 1699. C
Page 177 and 178: Capturing Alarms and Events 1718. C
Page 179 and 180: Capturing Alarms and Events 173To c
Page 181 and 182: Security 175Chapter 12 - SecurityTh
Page 183 and 184: Security 177Object SecurityMany obj
Page 185 and 186: Security 179When Interlock is enabl
Page 187 and 188: Security 181Additional Security Fea
Page 189 and 190: Security 183XOB PasswordA project (
Page 191 and 192: Security 185System PasswordsThe Sys
Page 193 and 194: Security 187Upload Password: The pa
Page 195 and 196: Security 189Upload (History) Passwo
show all

Silver Series Installation and Operation Manual, Rev B ... - Watlow

Create successful ePaper yourself

Delete template?

Save as template?