hager TX216 KNX/EIB DALI-Gateway - UTU

hager"DALI Gateway C00Cx2" softwareParameters4.2.5 ParametersDescription: Values: Remarks:GeneralDALI error statusfeedback ?Yes, feedback object is activemessage objectYes, feedback object ispassive status objectNoThe error status of the DALI devices can bereported to the bus. Setting "Yes" activatesthe reporting function and enables thecorresponding object.Moreover, the parameter defines whetherthe feedback telegrams are transmittedactively (telegram transmission in case ofchanges) or passively (telegramtransmission only as a response to a Readrequest). The communication flags of theobject are automatically set by the ETSaccording to the setting.DALI Gateway mainsvoltage failure/returnfeedback ?Yes (in case of voltage failureand return)Yes (only in case of voltagefailure)NoThe DALI Gateway is able to monitor itssupply voltage (mains voltage connection)and can transmit a message telegram tothe bus in case of failure even beforeshutting down.Setting "yes" activates the reportingfunction and enables the correspondingobject.Moreover, it determines whether themessage is to be transmitted only in caseof supply voltage failure or also in case ofsupply voltage return.DALI short-circuitfeedback ?YesNoThe DALI Gateway can transmit amessage telegram to the bus if it detects ashort-circuit in the DALI line.The "yes" setting activates the reportingfunction and enables the correspondingobject.Alternatively, the “no” setting deactivatesthe short-circuit message.• The “DALI short-circuit” or “DALI voltagefailure” messages will only be triggered ifthe corresponding event has taking placeand in case the mains voltage for theDALI Gateway is active.• The “DALI error status”, “DALI shortcircuit”or “DALI voltage failure”messages will not automatically betransmitted to the bus after the return ofbus voltage with bus voltage applied atthe DALI Gateway.Seite 104 von 130