hager TX216 KNX/EIB DALI-Gateway - UTU

More documents

Recommendations

Info

hager"DALI Gateway C00Cx2" softwareParametersCyclical transmission offeedback telegram ?The object value of the feedback can betransmitted in cycles.Yes (cyclical transmission andtransmission in case ofchanges)No (transmission only incase of changes)The feedback telegram is transmitted to thebus in cycles and after a change of status.Generally, the cycle time will beprogrammed on the “Groups” parametercard for all feedback telegrams.The feedback telegram is transmitted to thebus only after the status has changed.• This parameter becomes visible only incase of an actively transmitting feedbackobject.Seite 124 von 130
hager"DALI Gateway C00Cx2" softwareParametersSwitch-on/switch-off behaviourSelection of time delayNoneON-delayOFF-delayON-delay and OFF-delayThe “Switching” and “Switching centralfunction” communication objects can beseparately evaluated. This parameter isused to define the desired mode ofoperation of the time delay and to enablethe other delay parameters.ON-delay time 00:00:01 … 23:59:59[hh:mm:ss]30 sThis parameter is used for programmingthe duration of the ON-delay• This parameter becomes visible only ifthe On-delay or the On and OFF-delayhas been activated.ON-delay retriggerable ? YesNoAn active ON-delay can be retriggered byanother "1" telegram (setting "yes")Alternatively, retriggering can besuppressed (setting "No").• This parameter becomes visible only ifthe On-delay or the On and OFF-delayhas been activated.OFF-delay time 00:00:01 … 23:59:59[hh:mm:ss]30 sThis parameter is used for programmingthe duration of the OFF-delay• This parameter becomes visible only ifthe Off-delay or the On and OFF-delayhas been activated.OFF-delay retriggerable?YesNoAn active OFF-delay can be retriggered byanother "0" telegram (setting "yes")Alternatively, retriggering can besuppressed (setting "No").• This parameter becomes visible only ifthe Off-delay or the On and OFF-delayhas been activated.Soft-ON function ?YesNoThe Soft-ON function permits a sloweddownswitch-on of the DALI group. If thefunction is activated (setting “Yes”) adimming operation is started until theswitch-on brightness is reached onreception of a switch-on telegram via the“Switching” or “Switching central function”objects.Seite 125 von 130
Page 3 and 4:
hagerProduct definition1 Product de
Page 5:
hagerFitting, electrical connection
Page 8 and 9:
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
hagerTechnical data3 Technical data
Page 20 and 21:
hagerSoftware specifications4 Softw
Page 22 and 23:
hager"DALI Gateway C00Cx2" software
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71:
Page 72 and 73:
Page 74 and 75: hager"DALI Gateway C00Cx2" software
Page 130: hager"DALI Gateway C00Cx2" software
show all

hager TX216 KNX/EIB DALI-Gateway - UTU

Create successful ePaper yourself

Delete template?

Save as template?