hager TX216 KNX/EIB DALI-Gateway - UTU

hager"DALI Gateway C00Cx2" softwareFunctional description• Set the “Staircase timer function ?” parameter in the “Groups - [x] group name – Staircase timerfunction" parameter node to “Yes”.The Staircase timer function is now enabled. Other parameters will become visible.• Configure the required switch-on time of the Staircase timer function with the “Staircase lighting time”parameter.• Set the "Staircase lighting time retriggerable ?" parameter to "Yes".Any ON-telegram received during the ON-phase of the staircase lighting time will retrigger thestaircase lighting time completely.• Alternatively, set the "Staircase lighting time retriggerable ?" parameter to "No".ON-telegrams received during the ON-phase of the staircase lighting time will be discarded. Thestaircase lighting time will not be retriggered.• An ON-telegram received during the pre-warning time will always retrigger the staircase lighting timeindependent of the "Staircase lighting time retriggerable ?" parameter.Defining the switch-off behaviour of the Staircase timer functionIn a Staircase timer function, the reaction to an OFF-telegram to the "Staircase timer start / stop" objectcan also be parameterized. Without an OFF-telegram, the devices of the DALI group might switch offafter the pre-warning time has elapsed. With a possible pre-warning function, the Staircase timerfunction has the switch-off behaviour as shown in Fig. 27.Telegram"Staircase timer functionstart/stop"DALI groupSwitch-on brightnessPrewarning brightnessSwitching statusfeedbackONOFFONResponse toOFF-telegram = switching offONOFFON