hager TX216 KNX/EIB DALI-Gateway - UTU

hager"DALI Gateway C00Cx2" softwareScope of functions4.2 "DALI Gateway C00Cx2" software4.2.1 Scope of functionsGeneral:• Control of a maximum of 64 DALI devices in a max. of 32 groups.• Manual control of the groups independent of the bus (site operation with broadcast control).• Feedback of DALI error status or short-circuit and supply voltage failure message.• Central switching function.• Incorporation of the groups into up to 16 light-scenes possible.Channel-oriented:• Each group features the full scope of functions without any restrictions. All channel-orientedfunctions can be parameterized separately for each group. This feature permits independent andmulti-functional control of the DALI devices. However, the Staircase timer function can only beparameterized for groups 1 ... 16.• Switching feedback and brightness value: active (after changes or cyclical transmission to the bus)or passive (object read-out function) feedback function.• Adjusting the limit values for brightness is possible.• Dimming response can be parameterized.• Soft-On or Soft-Off function.• Disable function or, alternatively, forced-control position function can be parameterized for eachgroup. With the disable function, blinking of lighting groups is possible.• Timer functions (ON-delay, OFF-delay, staircase lighting function, also with pre-warning function).• Response to bus voltage failure and bus voltage return as well as after ETS programming can beadjusted for each group.Plug-in:• Convenient DALI commissioning without additional software components.• Test function for all created DALI groups or DALI devices: central ON/OFF switching, individualhardware check (ON / OFF, brightness value preset, device status), individual group check(switching, dimming) and scene check.• Export and import of preset parameters in XML format.• Printing function for creating a configuration report (overview of group assignments or of the entiredevice configuration).Seite 21 von 130