hager TX216 KNX/EIB DALI-Gateway - UTU

More documents

Recommendations

Info

hager"DALI Gateway C00Cx2" softwareObject tableFunction: Staircase timer function 3Object Function Name Type DP type Flag5, 12, 19, … , 110 Staircase timer Group 1 ... 16 1-bit 1.010 C, W, -, (R) 1function start/stopDescription: 1-bit object for activating or deactivating the switching time of the Staircase timerfunction of an output ("1" = on / "0" = off).Function: Disable functionObject Function Name Type DP type FlagDisable Group 1 ... 32 1-bit 1.003 C, W, – (R) 16, 13, 20, … , 111117, 123, …, 207Description:1-bit object for disabling a group (polarity is parameterizable).Function: Forced-control position functionObject Function Name Type DP type Flag6, 13, 20, … , 111 Forced-control Group 1 ... 32 2-bit 2.001 C, W, – (R) 1117, 123, …, 207positionDescription: 2-bit object for the forced-control position of a group. The polarity will be provided bythe telegram.3 The Staircase timer function can only be parameterized for the first 16 groups.1 Each communication object can be read-out. The readout requires the setting of the R flag.Seite 26 von 130
hager"DALI Gateway C00Cx2" softwareFunctional description4.2.4 Functional description4.2.4.1 Application basicsDALIThe DALI Gateway represents the interface between a KNX/EIB building installation and a digital DALI(Digital Addressable Lighting Interface) lighting system. Normally, all DALI systems are room-orientedand deal with the high demands on functional light management in, for example, offices, training andconference rooms. Often, these applications make it necessary to incorporate the room-oriented DALIsystem also into the KNX/EIB facility management across buildings. That makes it possible not only tocontrol the DALI lighting system via the sensor components of the KNX/EIB but also to incorporate theshutter, heating and air conditioning systems already existent in the buildings into the lightmanagement.A DALI system can address a maximum of 64 devices. The Gateway itself does not count as a device.The DALI Gateway offers 32 KNX/EIB controllable groups that are parameterized in the ETS 3 similarto a dimming actuator channel. There are several communication objects available at the bus thatpermit, among other things, the switching, the dimming, the setting of brightness values or the time orscene control of a group. During the DALI commissioning, the DALI devices (max. of 64) will beoptionally assigned one or several groups of the Gateway (cf. figure 5 on the following page). It is thegroup assignment that makes it possible to control the DALI devices individually (individual assignment– only one device in the group) or collectively (multiple assignment – several devices in a group) via theKNX/EIB.A multiple assignment of DALI devices is possible for the groups 1...16 of the DALI Gateway. In thiscase the addressing takes place at the DALI via group addresses that the DALI Gateway configures“hidden” to the user. The DALI Gateway handles them independently. During the DALI commissioning,all affected devices will be automatically programmed.The groups 17...32 accept only individual assignments. Each group can be assigned only one DALIdevice. In this case, the DALI addressing takes place via an internally specified individual address.Only one device can be uniquely addressed via this individual address. This individual address will alsobe automatically assigned by the DALI Gateway during the DALI commissioning.The DALI commissioning takes place entirely via the plug-in embedded in the ETS 3 via the KNX/EIBbus line. No additional tool and no special programming link is required.The commissioning of the DALI devices as well as the DALI configuration or the DALI addressing takesplace fully automatic via the plug-in and the DALI Gateway. Only the assignment between the DALIdevice and the group must be carried out ‘manually’ in the commissioning environment of the plug-in.Different test or detection functions (separate switching on, switching off or blink function) available inthe plug-in make it also considerably easier to commission the different DALI devices.Seite 27 von 130
Page 3 and 4: hagerProduct definition1 Product de
Page 5: hagerFitting, electrical connection
Page 8 and 9: hagerFitting, electrical connection
Page 18 and 19: hagerTechnical data3 Technical data
Page 20 and 21: hagerSoftware specifications4 Softw
Page 22 and 23: hager"DALI Gateway C00Cx2" software
Page 76 and 77:
hager"DALI Gateway C00Cx2" software
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130:
show all

hager TX216 KNX/EIB DALI-Gateway - UTU

You also want an ePaper? Increase the reach of your titles

Delete template?

Save as template?