hager TX216 KNX/EIB DALI-Gateway - UTU

More documents

Recommendations

Info

hagerTechnical data3 Technical dataType of protection: IP 20Safety class:IIIMark of approval:KNX / EIB / VDEAmbient temperature: -5 °C ... +45 °CStorage / transport temperature: -25 °C ... +70 °C(Storage above + 45 °C reduces the lifetime)Mounting position:optional (screw terminals preferably on top)Minimum distances:noneType of fastening:Snap-fastening on DIN rail in closed cabinets (e.g. smalldistributions, etc.) / KNX / EIB data rail not required.KNX / EIB supplyVoltage:Power consumption:Connection:External supplyVoltage:Power consumption:Connection:Total power loss:Response to bus voltage failure:Response to bus voltage failureResponse to bus voltage return:Response to mains voltage return:21…32 V DC SELVtypically 150 mWstandard KNX/EIB bus connection terminal110...240 V AC +10 % / -15 %, 50/60 Hzmax. 6 Wwith screw terminals:0,5…4 mm² solid and stranded wire without ferrule0,5…2,5 mm² stranded wire with ferruleMax. tightening torque: 0.8 Nmmax. 3 Wdepending on parameterization(cf. chapter 4. "Software description")As per parameterization, the device can report the supply voltagefailure to the bus. Afterwards, the device will completely shutdown.depending on parameterization(cf. chapter 4. "Software description")The device will briefly initialize (" " display) and is then readyfor operation. As per parameterization, the device can report thereturn of supply voltage to the bus.The brightness of a DALI group depends on the parameterization(cf. Chapter 4. “Software description”).Seite 18 von 130
hagerTechnical dataDALI:Voltage:Current:typically 16 V DCwith over-voltage protectiontypically 128 mA, max. 200 mA temporarilydesigned for a maximum of 64 DALI devices at 2 mAwith short-circuit and overload protection1200 bit/sacc. to DIN EN 60929 appendix E4Transmission rateProtocol:Cable lengths betweenGateway and device:∅ 1,5 mm²max. 300 m∅ 1,0 mm²max. 238 m∅ 0,75 mm²max. 174 m∅ 0,5 mm²max. 116 mResistivity:max. 4 Ω (single length) / max. 8 Ω (main and return cable)Cable type: Specified by functional extra-low voltage. (FELV) /Preferably 2 free wires of a NYM installation line.Seite 19 von 130
Page 3 and 4: hagerProduct definition1 Product de
Page 5: hagerFitting, electrical connection
Page 8 and 9: hagerFitting, electrical connection
Page 20 and 21: hagerSoftware specifications4 Softw
Page 22 and 23: hager"DALI Gateway C00Cx2" software
Page 68 and 69:
hager"DALI Gateway C00Cx2" software
Page 70 and 71:
Page 72 and 73:
Page 74 and 75:
Page 76 and 77:
Page 78 and 79:
Page 80 and 81:
Page 82 and 83:
Page 84 and 85:
Page 86 and 87:
Page 88 and 89:
Page 90 and 91:
Page 92 and 93:
Page 94 and 95:
Page 96 and 97:
Page 98 and 99:
Page 100 and 101:
Page 102 and 103:
Page 104 and 105:
Page 106 and 107:
Page 108 and 109:
Page 110 and 111:
Page 112 and 113:
Page 114 and 115:
Page 116 and 117:
Page 118 and 119:
Page 120 and 121:
Page 122 and 123:
Page 124 and 125:
Page 126 and 127:
Page 128 and 129:
Page 130:
show all

hager TX216 KNX/EIB DALI-Gateway - UTU

Create successful ePaper yourself

Delete template?

Save as template?