hager TX216 KNX/EIB DALI-Gateway - UTU

More documents

Recommendations

Info

hager"DALI Gateway C00Cx2" softwareParametersSwitchingSwitching statusfeedback ?The current switching state of the DALIgroup can be reported back separately tothe bus.Yes, feedback object is activemessage objectYes, feedback object ispassive status objectNoFeedback and object are activated. Thestatus is transmitted in non-inverted form.The object transmits actively (telegramtransmission after change or, if applicable,in cycles).Feedback and object are activated. Thestatus is transmitted in non-inverted form.The object is passive (telegramtransmission only as a response to a readrequest.No feedback object available for the group.Feedback is deactivated.• The communication flags of the objectare automatically set by the ETS plug-inaccording to the setting.Time delay for feedbacktelegram after busvoltage return ?YesNoThe feedback telegram can be transmittedto the bus with a delay after bus voltagereturn or after programming with the ETS.The "Yes" setting activates the delay timeof the feedback in case of bus voltagereturn. Generally, the delay time will beparameterized on the "group" parameterpage.• This parameter becomes visible only incase of an actively transmitting feedbackobject.Cyclical transmission offeedback telegram ?Yes (cyclical transmission andtransmission in case ofchanges)No (transmission only incase of changes)The object value of the feedback can betransmitted cyclically.The feedback telegram is transmitted to thebus cyclically and after a change of status.Generally, the cycle time will beprogrammed on the “Groups” parametercard for all feedback telegrams.The feedback telegram is transmitted to thebus only after the status has changed.• This parameter becomes visible only incase of an actively transmitting feedbackobject.Seite 120 von 130
hager"DALI Gateway C00Cx2" softwareParametersAssignment to centralfunction ?This parameter determines the assignmentof the DALI group to the central function.YesNoThe group is assigned to the centralfunction.The group is not assigned to the centralfunction.• This parameter becomes visible only ifthe central function is enabled.Seite 121 von 130
Page 3 and 4:
hagerProduct definition1 Product de
Page 5:
hagerFitting, electrical connection
Page 8 and 9:
Page 10 and 11:
Page 12 and 13:
Page 14 and 15:
Page 16 and 17:
Page 18 and 19:
hagerTechnical data3 Technical data
Page 20 and 21:
hagerSoftware specifications4 Softw
Page 22 and 23:
hager"DALI Gateway C00Cx2" software
Page 24 and 25:
Page 26 and 27:
Page 28 and 29:
Page 30 and 31:
Page 32 and 33:
Page 34 and 35:
Page 36 and 37:
Page 38 and 39:
Page 40 and 41:
Page 42 and 43:
Page 44 and 45:
Page 46 and 47:
Page 48 and 49:
Page 50 and 51:
Page 52 and 53:
Page 54 and 55:
Page 56 and 57:
Page 58 and 59:
Page 60 and 61:
Page 62 and 63:
Page 64 and 65:
Page 66 and 67:
Page 68 and 69:
Page 70 and 71: hager"DALI Gateway C00Cx2" software
Page 130: hager"DALI Gateway C00Cx2" software
show all

hager TX216 KNX/EIB DALI-Gateway - UTU

Create successful ePaper yourself

Delete template?

Save as template?