SPOT 4.1 Basic and Advanced Software Manual for SPOT Insight ...

Installation GuidelinesEquipment Standards – Windows (cont.)MinimumMonitorOperating SystemAny color monitor with at least 800 x 600 pixel resolution at 24 bit RGB, and a refresh rateover 70 Hz.Windows 98SE/2000/ME/XPWindows 95, 98, and NT are not supported for the Insight FireWire Camera SystemPrinterWeb BrowserDriver required for reports featureInternet Explorer 4.0 or greaterEquipment Standards - MacMinimumProcessorVideo Memory/CardRAMFireWire (IEEE1394a)PortMonitorOperating SystemPrinterImage Editing Software(optional)400 MHz G3 PowerPCEnough video memory on either the mother board or a plug in video card to displaymillions of colors at the desired resolution, and with a refresh rate above 70 Hz256 MbOne available 6 pin (6-4 pin converters available for special order)Any color monitor with at least 800 x 600 pixel resolution at 24 bit RGB, and a refresh rateover 70 Hz.Mac OS10.1 or greaterDriver required for reports featureThe SPOT 3 rd Party Interface, which is included with Mac software, is a stand-alone miniapplicationdesigned for Mac users who want to use the SPOT camera to captureimages, and then edit the images in another imaging application. Some commonly usedthird party applications include:• Adobe Photoshop• Image Pro Plus• Color ItThe image editing software used with the SPOT 3 rd Party Interface does not need to beTWAIN compliant. Refer to Ch. 17 – Using Other Mac Imaging Applications for moreinformation.User Guide to the SPOT Insight Camera 11